Print Back
  • Surface Mount
  • Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte
  • Suitable for DC-DC converters, voltage regulators and decoupling applications used on computer motherboards etc.
  • Solvent resistant type
  • Halogen Free
NPCAP™-PXA Series 180 Microfarad (µF) Capacitance Conductive Polymer Aluminum Solid Capacitor
Unit of Measure
Items NPCAP™-PXA Series 180 Microfarad (µF) Capacitance Conductive Polymer Aluminum Solid Capacitor
APXA160ARA181MHC0G
NPCAP?-PXA Series 180 Microfarad (?F) Capacitance Conductive Polymer Aluminum Solid Capacitor
List Price {QUOTE}
NPCAP™-PXA Series 330 Microfarad (µF) Capacitance Conductive Polymer Aluminum Solid Capacitor
APXA160ARA331MJC0G
NPCAP?-PXA Series 330 Microfarad (?F) Capacitance Conductive Polymer Aluminum Solid Capacitor
List Price {QUOTE}
Manufacturer Stock N/A {0} N/A {0}
Description N/A
  • Surface Mount
  • Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte
  • Suitable for DC-DC converters, voltage regulators and decoupling applications used on computer motherboards etc.
  • Solvent resistant type
  • Halogen Free
Brands N/A Nippon Chemi-Con
Manufacturer N/A United Chemi-Con
Series N/A NPCAP™-PXA
Temperature Range N/A -55 to +105 ºC
Working Direct Current (DC) Voltage N/A 16 V
Capacitance N/A 180 µF N/A 330 µF
Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature N/A 20 %
Diameter (D) N/A 8 mm N/A 10 mm
Dimension L N/A 12 mm N/A 12.5 mm
Dimension A N/A 8.3 mm N/A 10.3 mm
Dimension B N/A 8.3 mm N/A 10.3 mm
Dimension C N/A 9 mm N/A 11 mm
Dimension W N/A 0.7 to 1.1 mm
Dimension P N/A 3.1 mm N/A 4.5 mm
Maximum Equivalent Series Resistance (ESR) at 100 to 300 Kilohertz (kHz) Frequency, 20 Degree Celsius (ºC) Temperature N/A 16 mΩ N/A 14 mΩ
Rated Ripple Current at 105 Degree Celsius (ºC) Temperature, 100 Kilohertz (kHz) Frequency N/A 4360 mArms N/A 5050 mArms
Maximum Leakage Current at 20 Degree Celsius (ºC) Temperature After 2 Minutes1 N/A 576 µA N/A 1050 µA
Maximum Dissipation Factor (Tan δ) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature N/A 0.12
Maximum Impedance Ratio Low Temperature Characteristics at 100 Kilohertz (kHz) Frequency N/A Z(-25 ºC)/Z(+20 ºC) ≤1.15
Z(-55 ºC)/Z(+20 ºC) ≤1.25
Failure Rate N/A 0.5% per 1,000 hours maximum (Confidence level 60% at 105 ºC)
Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency N/A 0.05
Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency N/A 0.30
Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency N/A 0.55
Rated Ripple Current Multipliers at 50 Kilohertz (kHz) Frequency N/A 0.70
Rated Ripple Current Multipliers at 100 to 500 Kilohertz (kHz) Frequency N/A 1
Industry Standards N/A Restriction of Hazardous Substances (RoHS) Compliant
Endurance N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after the rated voltage is applied for 15,000 hours (F45 : 3,000 hours) at 105 ºC.

Appearance: No significant damage
Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ 150% of the initial specified value
ESR: ≤ 150% of the initial specified value
Leakage current: ≤ The initial specified value
Bias Humidity Test N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjecting them to DC voltage at 60 ºC, 90 to 95% RH for 1,000 hours.

Appearance: No significant damage
Capacitance change: ≤ ±20% of the initial
D.F. (tan δ): ≤ 150% of the initial specified value
ESR: ≤ 150% of the initial specified value
Leakage current: ≤ The initial specified value
Direct Current Surge Voltage (SVDC) N/A 18 V
Surge Voltage Test N/A The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 ºC for 30 seconds through a protective resistor (R=1 kΩ) and discharge for 5 minutes 30 seconds.

Appearance: No significant damage
Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ 150% of the initial specified value
ESR: ≤ 150% of the initial specified value
Leakage current: ≤ the initial specified value
Note N/A Product specifications are subject to change without notice. Request our product specifications before purchase and/or use. Please use our products based on the information product specifications.
  • 1 If any doubt arises, measure the leakage current after the following voltage treatment.
    Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105 ºC.