Print Back
Developed for PDP, LCD or small electronics equipment. This low insertion type connector realizes easier mating operation. The basic concept of the contact part of this connector is equivalent to the performance proven SHL connector.
Unit of Measure

Specifications

Available

Manufacturer Stock

Brands

JST

Manufacturer

JST

Series

GH

Pitch Size

1.25 mm0.049 in

Mounting Type

Crimp

Industry Standards

Underwriters Laboratories (UL) Recognized E60389

Circuits

5

Quantity Per Reel

2500
Alternating Current (AC) Rating1 1 A
Direct Current (DC) Rating2 1 A

Alternating Current (AC) Voltage Rating

50 V

Direct Current (DC) Voltage Rating

50 V
Temperature Range3 -25 to +85 ºC

Maximum Contact Resistance After Environmental Testing

50 mΩ

Minimum Insulation Resistance

100 MΩ

Withstanding Alternating Current (AC) Voltage Per Minute

500 V

Applicable Conductor Wire Size

30 to 26 AWG

Applicable Insulation Wire Outside Diameter (OD)

0.8 to 1.0 mm0.031 to 0.039 in

Dimensions

Dimension A

5.00 mm0.197 in

Dimension B

9.50 mm0.374 in

Material and Finish

Contact Material

Copper-Undercoated, Phosphor Bronze, Tin-Plated

Housing Material

Natural Polyamide (PA9T), UL94V-0

Solder Tab Material

Brass, Copper-Undercoated, Tin-Plated

Features

Features

  • Secure locking structure
    This innovative housing lock design achieves a locking device which is easy to handle as well as secure.
  • Contact lock structure
    A contact lock provides a good "click feeling" when mated, which prevents improper mating during assembly.
  • Prevent deformation of contacts
    Fork-shaped header contacts are supported by grooves on the housing walls designed to prevent deformation of contacts.

Note

Note

Contact JST if Lead-Free product is required.
Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog.
Contact JST for details.
  • 1 AWG #26
  • 2 AWG #26
  • 3 Including temperature rise in applying electrical current