Projections Unlimited, Inc
PUI | Global Corporate HQ
15311 Barranca Parkway
Irvine , CA , 92618
United States
Phone:(714) 544-2700
Email: sales@gopui.com
Print Back
  • Radial Lead
  • Super low ESR, high temperature resistance
  • Large capacitance & Improved high ripple current capability
  • Suitable for DC-DC converters, voltage regulators and decoupling applications. For computer motherboards
  • Solvent resistant type
  • Halogen Free
Unit of Measure

Specifications

Available

 0

Manufacturer Stock

Brands

 Nippon Chemi-Con

Manufacturer

 United Chemi-Con

Series

 NPCAP™-PS

Temperature Range

 -55 to +105 ºC

Working Direct Current (DC) Voltage

 16 V

Capacitance

 180 µF

Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature

 20 %

Maximum Equivalent Series Resistance (ESR) at 100 to 300 Kilohertz (kHz) Frequency, 20 Degree Celsius (ºC) Temperature

 16 mΩ

Rated Ripple Current at 105 Degree Celsius (ºC) Temperature, 100 Kilohertz (kHz) Frequency

 4360 mArms

Surge Voltage at 105 Degree Celsius (ºC) Temperature

 Rated voltage x 1.15
Leakage Current at 20 Degree Celsius (ºC) Temperature After 2 Minutes1 I=0.2CV
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (Vdc)

Maximum Dissipation Factor (Tan δ) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature

 0.12

Maximum Impedance Ratio Low Temperature Characteristics at 100 Kilohertz (kHz) Frequency

 Z(-25 ºC)/Z(+20 ºC) ≤1.15
Z(-55 ºC)/Z(+20 ºC) ≤1.25

Endurance at 105 Degree Celsius (ºC) Temperature

 15000 hours

Failure Rate

 0.5% per 1,000 hours maximum (Confidence level 60% at 105 ºC)

Industry Standards

 Restriction of Hazardous Substances (RoHS) Compliant

Dimensions

Diameter (D)

 8 mm

Maximum Diameter (D)

 8.5 mm

Dimension L

 11.5 mm

Maximum Dimension L

 13 mm

Diameter (d)

 0.6 mm

Dimension F

 3.5 mm

Endurance

Endurance

The following specifications shall be satisfied when the capacitors are restored to 20 ºC after the rated voltage is applied for 15,000 hours at 105 ºC.

Appearance: No significant damage
Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ 150% of the initial specified value
ESR: ≤ 150% of the initial specified value
Leakage current: ≤ The initial specified value

Bias Humidity Test

Bias Humidity Test

The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjecting them to DC voltage at 60 ºC, 90 to 95% RH for 1,000 hours.

Appearance: No significant damage
Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ 150% of the initial specified value
ESR: ≤ 150% of the initial specified value
Leakage current: ≤ The initial specified value

Surge Voltage Test

Surge Voltage Test

The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 ºC for 30 seconds through a protective resistor (R=1 kΩ) and discharge for 5 minutes 30 seconds.

Appearance: No significant damage
Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ 150% of the initial specified value
ESR: ≤ 150% of the initial specified value
Leakage current: ≤ the initial specified value

Note

Note

Product specifications are subject to change without notice. Request our product specifications before purchase and/or use. Please use our products based on the information product specifications.
  • 1 If any doubt arises, measure the leakage current after the following voltage treatment.
    Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105 ºC.