Item # IXP3S02M, IX Series Pushbutton Switches for Harsh Environments On PUI - Projections Unlimited, Inc.

Skip to Content

Request Information

List Price

Price Breaks

Unit: Discount Price / %
1 - 9: 0%
10 - 24: 22.22%
25 - 49: 36.36%
50 - 99: 41.67%
100 and up: 46.15%

Unit of Measure

Specifications | Environmental Specifications | Electrical Specifications | General Specifications | Materials | Distinctive Features | Note

Specifications

Available	N/A
Manufacturer Stock	N/A
Brands	N/A APEM
Manufacturer	N/A APEM
Series	N/A IX
Bushing Diameter	N/A 12 mm
Maximum Solder Temperature	N/A 320 ºC608 ºF

Environmental Specifications

Operating Temperature	N/A -40 to 85 ºC-40 to 185 ºF
Front Panel Sealing	N/A Ingress Protection (IP67) According to International Electrotechnical Commission (IEC) 60529 Ingress Protection (IP69K) According to Director Identification Number (DIN) 40050-9
Shock Resistance	N/A 100 g according to IEC 512-4, test 6c
Salt Spray	N/A International Electrotechnical Commission (IEC) 512-6, Test 11f
Ultraviolet (UV) Resistant Membrane	N/A ISO 4892-2 : 2013 ; method A, cycle 1 ; 750h

Electrical Specifications

Maximum Current Voltage Rating with Resistive Load Gold Plated Brass Contacts (0)¹	N/A 100 mA 28 VDC, 1,000,000 cycles
Maximum Current Voltage Rating with Resistive Load for Silver Contacts (1)²	N/A 2 A 28 VDC, 100,000 cycles
Initial Contact Resistance	N/A 100 mΩ
Minimum Insulation Resistance at 500 Volt (V) Direct Current (DC) Voltage	N/A 1 GΩ
Dielectric Strength	N/A 1500 V_rms
Contact Bounce	N/A 10 ms

General Specifications

Panel Thickness	N/A 2 to 8 mm
Total Travel	N/A 2 mm0.78 in
Total Travel Tolerance (±)	N/A 0.3 mm
Typical Operating Force	N/A 7 N
Typical Operating Force Tolerance (±)	N/A 3 N
Low Level/Mechanical Life	N/A 1000000 cycles
Torque	N/A 0.55 N·m
Maximum Torque³	N/A 0.6 N·m

Materials

Case Material	N/A Thermoplastic UL94-V0
Actuator Material	N/A Silicone
Bushing Material	N/A Acrylonitrile Butadiene Styrene (ABS) UL94 HB
Contact Material	N/A Brass Gold Plated
Output Wires Material	N/A American Wire Gauge (AWG) 24, section 0.23 mm² - 500 mm
Terminal Seal Material	N/A Epoxy

Distinctive Features

Distinctive Features

Backlighted marking in a compact case
Strong tactile feedback
momentary NO or NC/NO
High sealing level, no space between actuator and
bushing (IP67/IP69K)

Note

Note

The company reserves the right to change specifications without notice.

APEM products may be recycled at end-of-life for the re-claiming of valuable metal components.

¹ For W terminals, current has to be limited to 400 mA.
² For W terminals, current has to be limited to 400 mA.
³ Applied to nut