• Slip-on cap retention system
  • Integrated chip-LEDs
Unit of Measure

Specifications

Available

Manufacturer Stock

Brands

APEM Illumec™

Manufacturer

APEM

Dimensions

Length

10 mm

Width

10 mm

Height

10.4 mm

Environmental Specifications

Switch Sealing

Internet Protocol (IP67) according to International Electrotechnical Commission (IEC) 60529

Working Temperature

-30 ºC

Storage Temperature

85 ºC

Soldering Through-Hole

International Electrotechnical Commission (IEC) 60068-2-20 8

Soldering Surface Mount

Joint Electron Device Engineering Council (JEDEC) J-STD-020C

Electrical Specifications

Recommended Current at 24 Volts (V) Direct Current (DC) for Gold Contacts

0.5 μ to 50 mA

Recommended Current at 24 Volts (V) Direct Current (DC) for Silver Contacts

0.5 to 50 mA

Contact Resistance

<30 mΩ

Typical Contact Resistance

10 mΩ

Insulation Resistance

>10 MΩ

Contact Bounce

<2 ms

Typical Contact Bounce

0.5 ms

Mechanical Specifications

Standard Actuation Force

3.5 N

Maximum Actuation Force for 10 Seconds (sec)

100 N

Travel

1 mm

Lifetime

>10,000,000 Cycles

Materials

Housing Material

Polyphenylene Sulfide (PPS) UL94V0

Actuator Material

Polyphenylene Sulfide (PPS) UL94V0

Sealing Material

Silicone Rubber

Contacts Spring Material

Gold : +1µAu Silver : +3µAg Stainless Steel

Fixed Contact Material

Gold : SnCu + 2µNI + 1µAu Silver : SnCu + 2µNI + 3µAg

Terminal Material

SnCu + 2µNI + 3µSn100

Distinctive Features

Distinctive Features

  • Illumination with integrated chip-LEDs
  • Single or bi-color illumination
  • Momentary NO
  • Simple slip-on cap retention system

Note

Note

The company reserves the right to change specifications without notice.

All tolerance if not otherwise specified ±0.2mm.