Projections Unlimited, Inc
PUI | Global Corporate HQ
15311 Barranca Parkway
Irvine , CA , 92618
United States
Phone:(714) 544-2700
Email: sales@gopui.com
Print Back
ADTSM Series Mechanical Contact Style Square Stems with Cap
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A APEM

Manufacturer

 N/A APEM

Series

 N/A ADTSM

Type

 N/A Surface Mount

Color

 N/A Red, 260gf

Soldering

 N/A Lead Free

Package Style

 N/A Bulk Pack

Materials

Cover Material

 N/A Stainless Steel

Base Material

 N/A UL94-V0, Nylon Thermoplastic

Base Color

 N/A Black

Stem Material

 N/A UL94V-0 Nylon Thermoplastic

Stem Color

 N/A Black (100gf) Brown (160gf) Red (260gf) Salmon (320gf) Yellow (520gf)

Silicone Rubber Color

 N/A Red (300gf)

Contact Disc Material

 N/A Phosphor Bronze with Silver Cladding

Cap Material

 N/A Thermoplastic Acrylonitrile Butadiene Styrene (ABS)

Terminal Material

 N/A Brass with Silver Plating

Electrical Specifications

Electrical Life

 N/A 100000 cycles

Rating

 N/A 50 mA

Direct Current (DC) Voltage

 N/A 12 V

Maximum Contact Resistance

 N/A 100 mΩ

Minimum Insulation Resistance at 500 Volt (V) Direct Current (DC) Voltage

 N/A 100 MΩ

Dielectric Strength Alternating Current (AC) Voltage Per 1 Minute (min)

 N/A 250 V

Contact Arrangement

 N/A 1 Pole 1 Throw

Mechanical Specifications

Operational Force

 N/A 260 + 50gf Red

Stop Strength

 N/A Max 3kgf vertical static load continuously for 15 seconds.

Operating Temperature Range

 N/A -25 to 70 ºC

Storage Temperature Range

 N/A -30 to 80 ºC

Vibration Resistance

 N/A Directions: X,Y,Z, three mutually perpendicular directions. Frequency: 10-55-10Hz/1minute. MIL-STD-202F METHOD 201A. Time: 2 hours each direction. High reliability.

Shock Resistance

 N/A Directions: X,Y,Z, three mutually perpendicular directions Frequency: 10-55-10 Hz/1minute MIL-STD-202F Method 213B Time: 2 hours each direction. High reliability

Soldering Processes

Wave Soldering

 N/A Recommended solder temperature at 500 ºF (260 ºC) max. 5 seconds subject to PCB 1.6 mm thickness. (For through hole type)

Hand Soldering

 N/A Use a soldering iron of 30 watts, controlled at 350 ºC approximately 5 seconds while applying solder.

Features

Features

 N/A
  • Positive tactile feedback.
  • Ultraminiature structure suitable for high density mounting. Economic but high reliability.
  • Insert molded terminals prevent flux build-up during soldering.

Note

Note

 N/A Specifications subject to change without notice.