Projections Unlimited, Inc
PUI | Global Corporate HQ
15311 Barranca Parkway
Irvine , CA , 92618
United States
Phone:(714) 544-2700
Email: sales@gopui.com
Print Back
The eight ohm 18 mm x 13 mm AS01808AO-SC18-WP-R speaker is designed for high fidelity audio reproduction in the thinnest size possible-only 2.5 mm thick! Spring contacts offer quick electrical connection.
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A PUI Audio™

Manufacturer

 N/A PUI Audio�, Inc.

Thickness

 N/A 2.5 mm

Size

 N/A 18 x 13 mm

Tolerance (±)

 N/A 0.5 mm

Angle Tolerance (±)

 N/A 3 º

Rated Input Power

 N/A 1 W

Maximum Input Power

 N/A 1.2 W

Impedance

 N/A 8 Ω

Impedance Tolerance (±)

 N/A 15 %

Sensitivity

 N/A 96 dB

Sensitivity Tolerance (±)

 N/A 3 dB

Testing Condition for Sensitivity

 N/A (Sound Pressure Level (SPL) at 2.83 V/10 cm) Avg 0.8, 1.0, 1.2, 1.5 kHz in 1 cc enclosure

Resonant Frequency (Free Air)

 N/A 420 Hz

Resonant Frequency (Free Air) Tolerance (±)

 N/A 20 %

Frequency Range

 N/A Fo ~ 15000 Hz

Buzz, Rattle, etc.

 N/A Should not be Audible with 2.83 V Sine Sweep from 500 Hz to 15 kHz Installed in a 1cc Enclosure

Polarity

 N/A When Positive Voltage is Applied to the Positive Terminal, the Diaphragm will Move Outward

Operating Temperature

 N/A -20 ~ +70 ºC

Storage Temperature

 N/A -40 ~ +85 ºC

Weight

 N/A 1.8 g

Environmental Protection

 N/A Ingress Protection (IP65)

Industry Standards

 N/A Restriction of Hazardous Substances (RoHS) 2011/65/EU

Materials

Frame Material

 N/A Polyphthalamide (PPA)

Magnet Material

 N/A Neodymium (NdFeB)

Mechanical Reliability and Environment Testing

High Temperature Test

 N/A 96 hours at +85ºC ± 3ºC followed by two hours in normal room temperature

Low Temperature Test

 N/A 96 hours at -40 ºC ± 3 ºC followed by two hours in normal room temperature

Humidity Test

 N/A 96 hours at +55 ºC ± 3 ºC with relative humidity at 95% in accordance with IEC 68-2-67

Temperature Cycle Test

 N/A The part shall be subjected to 20 cycles using the following procedure:
Low temperature: -40ºC±3ºC
High temperature:+85ºC±3ºC
Cycle: 30 mins at High, 10 seconds High to Low, 30 mins at Low, 10 seconds minutes Low to High

Vibration Test

 N/A 10-55 to 10 Hz sine sweep, per minute at 1.5 mm amplitude
2 hours in each axis X, Y, and Z

Drop Test

 N/A Mount speaker to 150g fixture, drop fixture 1.5 meters onto marble surface 18 times total

Load Test

 N/A DUTs shall be tested under each specified climatic condition for a continuous period of 100 hours at rated noise power. Speakers mounted in a 1cc back cavity; simulated program signal (IEC 268-1) with crest factor of 1.8 ~ 2.2 in rated frequency range; high pass 12dB/Oct or steeper, cut off at 850Hz. Refer to IEC 268-5

Note for Reliability Testing

 N/A After each test, the speaker's SPL shall be ±3 dB of the original SPL

Features

Features

 N/A
  • PEEK diaphragm for flat frequency response
  • High-energy triple magnet neodymium motor
  • Double-sided tape for easy mounting
  • Dustproof and waterproof IP65-rated face

Note

Note

 N/A Specifications subject to change or withdrawal without notice.