Projections Unlimited, Inc
PUI | Global Corporate HQ
15311 Barranca Parkway
Irvine , CA , 92618
United States
Phone:(714) 544-2700
Email: sales@gopui.com
Print Back
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A PUI Audio™

Manufacturer

 N/A PUI Audio�, Inc.

Directivity

 N/A Omni-Directional

Data Format

 N/A 1/2 Cycle PDM

Sensitivity

 N/A -26 dB

Sensitivity Tolerance (±)

 N/A 1 dB

Testing Condition for Sensitivity

 N/A 1 kHz at 50 cm with 94 dB source 0 dB=1 V/Pa

Direct Current (DC) Rated Voltage

 N/A 1.8 V

Direct Current (DC) Operating Voltage Range

 N/A 1.6 to 3.6 V

Current Draw at Full Power Mode

 N/A 800 ~ 1000 µA

Current Draw at Low Power Mode

 N/A 400 ~ 450 µA

Signal to Noise Ratio at Full Power Mode

 N/A 58 dB

Signal to Noise Ratio at Low Power Mode

 N/A 56 dB

Note for Signal to Noise Ratio

 N/A 1 kHz, 94 dB input, A-Weighted

Frequency Range (-10 dB)

 N/A 20 ~ 15000 Hz

Total Typical Harmonic Distortion

 N/A 0.5 %

Testing Condition for Total Typical Harmonic Distortion

 N/A 94 dB at 50 cm, 1 kHz acoustic source

Load Capacitance

 N/A 140 pF

Acceptable Soldering Methods

 N/A Reflow Solder

Acoustic Overload Point (AOP) at Full Power Mode

 N/A 123 dB

Acoustic Overload Point (AOP) at Low Power Mode

 N/A 120 dB

Testing Condition for Acoustic Overload Point (AOP) at Low Power Mode

 N/A 10 % THD at 1 kHz, acoustic source 50cm away from microphone

Environmental Compliances

 N/A Restriction of Hazardous Substances (RoHS)/Halogen Free
Power Supply Rejection1 N/A -80 dB

Testing Condition for Power Supply Rejection

 N/A 100 mVpp Square Wave at 217 Hz, A-Weighted

Weight

 N/A < 0.3 g

Maximum Direct Current (DC) Voltage on Any Pin

 N/A 4 V

Maximum Sound Pressure Level (SPL) Before Damage (Source 50 cm From Microphone)

 N/A 160 dB

Maximum Mechanical Shock

 N/A 10000 G

Maximum Vibration

 N/A Pre-MIL-STD-883 Method 2007, Test Condition B

Operating Temperature (VDD < 3 VDC)

 N/A -40 ~ +100 ºC

Operating Temperature (VDD > 3 VDC)

 N/A -40 ~ +70 ºC

Storage Temperature

 N/A -40 ~ +125 ºC

Ingress Protection Rating

 N/A Ingress Protection (IP57)
Moisture Sensitivity Level (MSL)2 N/A 1

Clock Frequency at Sleep Mode

 N/A 0 ~ 320 kHz

Clock Frequency at Low Power Mode

 N/A 351 ~ 800 kHz

Clock Frequency at Full Power Mode

 N/A 1.024 ~ 4.096 MHz

Duty Cycle

 N/A 45 ~ 55 %

Testing Condition for Duty Cycle

 N/A For fCLK ≤ 2.4 MHz the duty cycle must be in the range of 40 ~ 60% and for fCLK > 2.4 MHz the duty cycle must be 50%

Tolerance (±)

 N/A 0.5 mm

Angle Tolerance (±)

 N/A 3 º

Operational Settings

High Logic Input

 N/A 0.65 x VDD ~ VDD + 0.3V

Low Logic Input

 N/A -0.3 ~ 0.35 x VDD

High Logic Output

 N/A 0.65 x VDD ~ VDD + 0.3V

Low Logic Output

 N/A -0.3 ~ 0.35 x VDD

Reliability Testing

Simulated Reflow (Without Solder)

 N/A Samples for qualification testing require 3 passes 260±5 ºC reflow solder profiles. 2 hours of setting time is required between each reflow profile test.

Static Humidity

 N/A Precondition at +25 ºC for 1 hour. Expose to +85 ºC with 85% relative humidity for 1000 hours. Dry at room ambient for 3±1 hour before taking final measurement.

Temperature Shock

 N/A Each cycle shall consist of 30 minutes at -40 ºC, 30 minutes at +125 ºC with 5 minutes transition time. Test duration is for 30 cycles, starting from cold to hot temperature.

Electrostatic-Sensitive Device (ESD) Sensitivity

 N/A Perform ESD sensitivity threshold measurements for each contact according to MIL-STD-883G, Method 3015.7 for Human Body Model. Identify the ESD threshold levels indicating passage of 8000V Human Body Model.

Vibration Test

 N/A Vibrate randomly along three perpendicular directions for 30 minutes in each direction, 4 cycles from 20~2000 Hz with a peak acceleration of 20 Gs.

Shock Test

 N/A Subject samples to half-sine shock pulses (3000±15% Gs for 0.3ms) in each direction, for a total of 18 shocks.

Drop Test

 N/A Drop samples from 1.5m height onto a steel surface, total 18 times and inspected for mechanical damage.

Operation Life

 N/A Subject samples to +125ºC for 168 hours under full maximum rated voltage.

Waterproof Test

 N/A Place 15 microphones in water at 1m depth for 30 minutes. Remove and dissect 5 pieces to check for water ingress. Test remaining 10 microphones for sensitivity after resting at room temperature for 2 hours.

Note for Reliability Testing

 N/A Microphone frequency response and sensitivity shall not deviate more than ±3 dB.

Note

Note

 N/A Specifications subject to change or withdrawal without notice.
  • 1 To Full Scale
  • 2 MSL level dependent on product remaining in sealed packaging until use.