Projections Unlimited, Inc
PUI | Global Corporate HQ
15311 Barranca Parkway
Irvine , CA , 92618
United States
Phone:(714) 544-2700
Email: sales@gopui.com
Print Back
PUI Audio??s all-new HD Series microphones use premium-grade FETs and diaphragms for high sensitivity and superior signal-to-noise ratio. Each microphone features GSM buzz-blocking capacitors. Upgrade the ECM microphone that you use today with a PUI Audio HD Series microphone.

The 9.7mm diameter AOM-5024L-HD-R is designed for extreme fidelity in even the quietest settings from 20 Hz to 20 kHz.
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A PUI Audio™

Manufacturer

 N/A PUI Audio�, Inc.

Directivity

 N/A Omni-Directional

Sensitivity

 N/A -24 dB

Sensitivity Tolerance (±)

 N/A 3 dB

Direct Current (DC) Rated Voltage

 N/A 3 V

Direct Current (DC) Operating Voltage Range

 N/A 1 ~ 10 V

Current Consumption

 N/A 500 µA

Note for Current Consumption

 N/A 3VS with 2.2 kΩ RL

Output Impedance at 1 Kilohertz (kHz) Frequency

 N/A 2.2 kΩ

Signal to Noise Ratio

 N/A 80 dB

Note for Signal to Noise Ratio

 N/A 1 kHz, 94 dB input, A-Weighted

Decreasing Voltage

 N/A -3 dB

Note for Decreasing Voltage

 N/A 3VS to 2VS

Maximum Sound Pressure Level (SPL) Input (Total harmonic distortion (THD) < 3 Percent (%))

 N/A 110 dB

Operating Temperature

 N/A -30 ~ +70 ºC

Storage Temperature

 N/A -40 ~ +85 ºC

Weight

 N/A < 0.3 g

Frequency Range

 N/A 20 to 20000 Hz

Tolerance (±)

 N/A 5 mm

Angle Tolerance (±)

 N/A 3 º

Overall Diameter

 N/A 9.7 mm

Industry Standards

 N/A Restriction of Hazardous Substances (RoHS) 2002/95/EC

Mechanical and Environment Testing

High Temperature Test

 N/A 200 hours at +70°C ± 3°C followed by two hours in normal room temperature

Low Temperature Test

 N/A 200 hours at -25°C ± 3°C followed by two hours in normal room temperature

Humidity Test

 N/A 200 hours at +40 ºC ± 3 ºC with relative humidity at 90% to 95% followed by 2 hours in normal room temperature

Temperature Cycle Test

 N/A 30 minutes at -25°C, 10 minutes at 20°C, 30 minutes at +70°C, 10 minutes at 20°C for five cycles, followed by 2 hours in normal room temperature

Vibration Test

 N/A 10-55 Hz for 1 minute with 1.52 mm distance, followed by a two-hour 3 axis test in packaging

Drop Test

 N/A Drop microphones in packaging onto concrete floor from 1 meter height in each of 3 axis

Electrostatic Discharge (ESD) Test

 N/A
  1. Contact discharge - Discharge 6000 VDC from capacitor into microphone output through 330 Ω resistor ten times.
  2. Air discharge - Discharge 8000 VDC into sound hole of the microphone ten times.

Note Electrostatic Discharge (ESD) Test

 N/A According to IEC 6100

Features

Features

 N/A
  • 9.7mm diameter
  • 5mm height
  • -24 dB sensitivity
  • 80 dB signal-to-noise ratio
  • True 20 Hz to 20 kHz performance

Note

Note

 N/A Specifications subject to change or withdrawal without notice.