PUI | Global Corporate HQ
15311 Barranca Parkway
Irvine , CA , 92618
United States
Phone:(714) 544-2700
Email: sales@gopui.com
15311 Barranca Parkway
Irvine , CA , 92618
United States
Phone:(714) 544-2700
Email: sales@gopui.com
Available |
N/A {0} |
Manufacturer Stock |
N/A {0} |
Brands |
N/A PUI Audio™ |
Manufacturer |
N/A PUI Audio�, Inc. |
Direct Current (DC) Rated Voltage |
N/A 5 V |
Direct Current (DC) Operating Voltage Range |
N/A 3 ~ 16 V |
Maximum Rated Current |
N/A 25 mA |
Minimum Sound Pressure Level (SPL) at 10 Centimeter (cm) |
N/A 98 dBA |
Resonant Frequency |
N/A 3000 Hz |
Resonant Frequency Tolerance (±) |
N/A 500 Hz |
Tone |
N/A Continuous |
Operating Temperature |
N/A -30 ~ +75 ºC |
Storage Temperature |
N/A -20 ~ +65 ºC |
Housing Material |
N/A Polybutylene Terephthalate (PBT) |
Terminal Material |
N/A Tin (Sn) Plated Copper |
Acceptable Soldering Methods |
N/A Hand Solder Wave Solder |
Diameter |
N/A 24 mm |
Diameter Tolerance (±) |
N/A 0.3 mm |
Tolerance (±) |
N/A 0.5 mm |
Angle Tolerance (±) |
N/A 3 º |
Weight |
N/A 5.4 g |
Industry Standards |
N/A Restriction of Hazardous Substances (RoHS) |
High Temperature Test |
N/A 96 hours at +75 ºC ± 2 ºC and allowed to rest for 2 to 4 hours. |
Low Temperature Test |
N/A 96 hours at -30 ºC ± 2 ºC and allowed to rest for 2 to 4 hours. |
Humidity Test |
N/A 96 hours at +40 ºC ± 2 ºC with relative humidity at 93% +2%/-3% and allowed to rest for 2 to 4 hours. |
Vibration Test |
N/A Test for the directions of X Y and Z (total 0.5 hours). To-and-fro. sweep time (from 10-55 Hz and then 55-10) under single amplitude of 1 mm is 1 minute. |
Drop Test |
N/A 3 times from height of 70 cm onto the surface of 10mm thick wooden board. |
Temperature Cycle Test |
N/A -30 ±2 ºC for 30 minutes Room temp. for 15 minutes +75 ±2 ºC for 30 minutes Room temp. for 15 minutes 5 cycles |
Solder Heat Resistance Test |
N/A The part leads (pins) shall be immersed in molten solder maintained at 260 ±5 ºC for 10seconds. |
Note for Reliability Testing |
N/A After the test part shall meet specifications, except the SPL shall be in ±10 dB. |
