Available |
N/A {0} |
Manufacturer Stock |
N/A {0} |
Brands |
N/A Nippon Chemi-Con |
Manufacturer |
N/A United Chemi-Con |
Series |
N/A NPCAP™-PXA |
Temperature Range |
N/A -55 to +105 ºC |
Working Direct Current (DC) Voltage |
N/A 16 V |
Capacitance |
N/A 180 µF |
Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature |
N/A 20 % |
Maximum Equivalent Series Resistance (ESR) at 100 to 300 Kilohertz (kHz) Frequency, 20 Degree Celsius (ºC) Temperature |
N/A 16 mΩ |
Rated Ripple Current at 105 Degree Celsius (ºC) Temperature, 100 Kilohertz (kHz) Frequency |
N/A 4360 mArms |
Maximum Leakage Current at 20 Degree Celsius (ºC) Temperature After 2 Minutes1 | N/A 576 µA |
Maximum Dissipation Factor (Tan δ) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature |
N/A 0.12 |
Maximum Impedance Ratio Low Temperature Characteristics at 100 Kilohertz (kHz) Frequency |
N/A
Z(-25 ºC)/Z(+20 ºC) ≤1.15 Z(-55 ºC)/Z(+20 ºC) ≤1.25 |
Failure Rate |
N/A 0.5% per 1,000 hours maximum (Confidence level 60% at 105 ºC) |
Industry Standards |
N/A Restriction of Hazardous Substances (RoHS) Compliant |
Diameter (D) |
N/A 8 mm |
Dimension L |
N/A 12 mm |
Dimension A |
N/A 8.3 mm |
Dimension B |
N/A 8.3 mm |
Dimension C |
N/A 9 mm |
Dimension W |
N/A 0.7 to 1.1 mm |
Dimension P |
N/A 3.1 mm |
Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency |
N/A 0.05 |
Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency |
N/A 0.30 |
Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency |
N/A 0.55 |
Rated Ripple Current Multipliers at 50 Kilohertz (kHz) Frequency |
N/A 0.70 |
Rated Ripple Current Multipliers at 100 to 500 Kilohertz (kHz) Frequency |
N/A 1 |
Endurance |
N/A
The following specifications shall be satisfied when the capacitors are restored to 20 ºC after the rated voltage is applied for 15,000 hours (F45 : 3,000 hours) at 105 ºC. Appearance: No significant damage Capacitance change: ≤ ±20% of the initial value D.F. (tan δ): ≤ 150% of the initial specified value ESR: ≤ 150% of the initial specified value Leakage current: ≤ The initial specified value |
Bias Humidity Test |
N/A
The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjecting them to DC voltage at 60 ºC, 90 to 95% RH for 1,000 hours. Appearance: No significant damage Capacitance change: ≤ ±20% of the initial D.F. (tan δ): ≤ 150% of the initial specified value ESR: ≤ 150% of the initial specified value Leakage current: ≤ The initial specified value |
Direct Current Surge Voltage (SVDC) |
N/A 18 V |
Surge Voltage Test |
N/A
The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 ºC for 30 seconds through a protective resistor (R=1 kΩ) and discharge for 5 minutes 30 seconds. Appearance: No significant damage Capacitance change: ≤ ±20% of the initial value D.F. (tan δ): ≤ 150% of the initial specified value ESR: ≤ 150% of the initial specified value Leakage current: ≤ the initial specified value |