Print Back
Non solvent resistant type
Unit of Measure

Specifications

Available

N/A {0}

Manufacturer Stock

N/A {0}

Brands

N/A Nippon Chemi-Con

Manufacturer

N/A United Chemi-Con

Series

N/A KMH

Working Direct Current (DC) Voltage

N/A 63 V

Direct Current Surge Voltage (SVDC)

N/A 79 V

Capacitance

N/A 15000 µF

Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature

N/A 20 %

Maximum Equivalent Series Resistance (ESR) at 120 Hertz (Hz) Frequency, +20 Degree Celsius (ºC) Temperature

N/A 0.014 Ω

Rated Ripple Current at 105 Degree Celsius (ºC) Temperature, 120 Hertz (Hz) Frequency

N/A 4.88 mArms

Temperature Range

N/A -40 to +105 ºC

Leakage Current at 20 Degree Celsius (ºC) Temperature After 5 Minutes

N/A I=0.02CV 3 µA or 3 mA, whichever is smaller.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)

Rated Lifetime

N/A 2000 hours

Note for Rated Lifetime

N/A At 105 ºC with rated ripple current applied.

Maximum Dissipation Factor (Tan δ) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature

N/A 0.15

Maximum Impedance Ratio Low Temperature Characteristics at 120 Hertz (Hz) Frequency

N/A Z(-25 ºC)/Z(+20 ºC) = 2
Z(-40 ºC)/Z(+20 ºC) = 6

Industry Standards

N/A Restriction of Hazardous Substances (RoHS) Compliant

Dimensions

Diameter (D)

N/A 35 mm

Dimension L

N/A 63 mm

Rated Ripple Current Multipliers

Rated Ripple Current Multipliers at +45 Degree Celsius (ºC) Ambient Temperature

N/A 2.64

Rated Ripple Current Multipliers at +60 Degree Celsius (ºC) Ambient Temperature

N/A 2.23

Rated Ripple Current Multipliers at +70 Degree Celsius (ºC) Ambient Temperature

N/A 2.12

Rated Ripple Current Multipliers at +85 Degree Celsius (ºC) Ambient Temperature

N/A 1.73

Rated Ripple Current Multipliers at +105 Degree Celsius (ºC) Ambient Temperature

N/A 1

Rated Ripple Current Multipliers at 50 Hertz (Hz) Frequency

N/A 0.92

Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency

N/A 1

Rated Ripple Current Multipliers at 300 Hertz (Hz) Frequency

N/A 1.07

Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency

N/A 1.13

Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency

N/A 1.19

Rated Ripple Current Multipliers at 100 Kilohertz (kHz) Frequency

N/A 1.20

Endurance

Endurance

N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjecting them to DC voltage for 2,000 hours at 105 ºC with the rated ripple current applied. The sum of the DC voltage and peak AC voltage must not exceed the full rated voltage of the capacitors.

Capacitance change: ≤ ±20% of the initial value
Tan δ (DF): ≤ 200% of the initial specified value
Leakage current: ≤ initial specified value

Shelf Life

Shelf Life

N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after exposing them for 1,000 hours at +105 ºC without voltage applied. The rated voltage shall be applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than 48 hours before the measurements.

Capacitance change: ≤ ±20% of the initial value
Tan δ (DF): ≤ 150% of the initial specified value
Leakage current: ≤ initial specified value

Features

Features

N/A
  • High CV
  • High Ripple
  • PC board 2 or 4-pin snap-in; optional 4 or 5-pin straight terminals.

Additional Information

Additional Information

N/A The standard KMH series capacitors are not solvent proof. Refer to guidelines and precautions on the website for usage and installation conditions recommended for United Chemi-Con products.