Print Back
Unit of Measure

Specifications

Available

N/A {0}

Manufacturer Stock

N/A {0}

Brands

N/A APEM

Manufacturer

N/A APEM

Series

N/A AV

Diameter

N/A 30 mm1.181 in

Light Emitting Diode (LED) Color

N/A Green

Terminal Type

N/A Flying Leads

Environmental Specifications

Optional Front Panel Sealing

N/A Internet Protocol (IP) 67 According to International Electrotechnical Commission (IEC) 60529

Robustness

N/A Impact Protection (IK) 06 according to EN 62262 (1 joule)

Operating Temperature

N/A -30 to 85 ºC-22 to 185 ºF

Electrical Specifications

Maximum Current Rating with Resistive Load

N/A 1 A

Maximum Direct Current (DC) Voltage with Resistive Load

N/A 30 V

Light Emitting Diode (LED) Direct Current (DC) Voltage

N/A 12 V24 V48 V

Initial Contact Resistance

N/A 100 mΩ

Minimum Insulation Resistance at 500 Volt (V) Direct Current (DC) Voltage

N/A 10 MΩ

Dielectric Strength

N/A 1,000 Vrms 50 Hz Minimum Between Terminals and Frame 500 Vrms 50 Hz Minimum Between Terminals

Electrical Life at Full Load

N/A 250000 cycles

General Specifications

Travel

N/A 2.5 mm0.003 in

Travel Tolerance (±)

N/A 0.3 mm

Operating Force

N/A 5 N

Operating Force Tolerance (±)

N/A 2 N
Maximum Torque1 N/A 10 N·m

Maximum Panel Thickness

N/A 1 to 6 mm0.039 to 0.236 in

Low Level/Mechanical Life

N/A 1000000 cycles

Maximum Hand Soldering Temperature for 5 Seconds (s)

N/A 350 ºC662 ºF

Units Per Package

N/A 1

Materials

Case Material

N/A Polyamide, Glass Filled

Contact Material

N/A Silver

Bushing Material

N/A Stainless Steel 316

Actuator Material

N/A Stainless Steel 316

Elastomeric Membrane

N/A Silicone

Distinctive Features

Distinctive Features

N/A
  • Large actuator with illuminated ring
  • Momentary NC/NO
  • Solder lug, flying lead or cable terminals
  • Marking available on request
  • Light Emitting Diode (LED)

Note

Note

N/A The company reserves the right to change specifications without notice.
  • 1 Applied to nut