PUI | Global Corporate HQ
15311 Barranca Parkway
Irvine , CA , 92618
United States
Phone:(714) 544-2700
Email: sales@gopui.com
15311 Barranca Parkway
Irvine , CA , 92618
United States
Phone:(714) 544-2700
Email: sales@gopui.com
Available |
N/A {0} |
Manufacturer Stock |
N/A {0} |
Brands |
N/A Nippon Chemi-Con |
Manufacturer |
N/A United Chemi-Con |
Series |
N/A Alchip™-MVA |
Working Direct Current (DC) Voltage |
N/A 6.3 V |
Capacitance |
N/A 220 µF |
Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature |
N/A 20 % |
Dissipation Factor (Tan δ) |
N/A 0.35 |
Rated Ripple Current at +85 Degree Celsius (ºC) Temperature, 120 Hertz (Hz) Frequency |
N/A 135 mArms |
Temperature Range |
N/A -40 to +85 ºC |
Leakage Current at 20 Degree Celsius (ºC) Temperature After 2 Minutes |
N/A
I=0.01CV or 3 µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) |
Maximum Impedance Ratio Low Temperature Characteristics at 120 Hertz (Hz) Frequency |
N/A Z(-25 ºC)/Z(+20 ºC) = 3 Z(-40 ºC)/Z(+20 ºC) = 3 |
Mounting Style |
N/A Surface Mount |
Industry Standards |
N/A Restriction of Hazardous Substances (RoHS) 2 Compliant |
Dimension D |
N/A 6.3 mm |
Dimension L |
N/A 5.2 mm |
Dimension L Tolerance (±) |
N/A 0.5 mm |
Dimension A |
N/A 6.6 mm |
Dimension B |
N/A 6.6 mm |
Dimension C |
N/A 7.2 mm |
Dimension W |
N/A 0.5 to 0.8 mm |
Dimension P |
N/A 1.9 mm |
Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency |
N/A 1 |
Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency |
N/A 1.05 |
Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency |
N/A 1.08 |
Rated Ripple Current Multipliers at 100 Kilohertz (kHz) Frequency |
N/A 1.08 |
Note for Rated Ripple Current Multipliers |
N/A
The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 ºC rise. When long life performance is required in actual use, the rms ripple current has to be reduced. |
Endurance |
N/A
The following specifications shall be satisfied when the capacitors are restored to 20 ºC after the rated voltage is applied for 2,000 hours at 85 ºC. Capacitance change: ≤ ±20% of the initial value D.F. (tan δ): ≤ 200% of the initial value Leakage current: ≤ The initial specified value |
Shelf Life |
N/A
The following specifications shall be satisfied when the capacitors are restored to 20 ºC after exposing them for 1,000 hours at 85 ºC without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change: ≤ ±20% of the initial value D.F. (tan δ): ≤ 200% of the initial value Leakage current: ≤ The initial specified value |
