Projections Unlimited, Inc
PUI | Global Corporate HQ
15311 Barranca Parkway
Irvine , CA , 92618
United States
Phone:(714) 544-2700
Email: sales@gopui.com
Print Back
AR Mobile Series 300 ~ 7000 Hertz (Hz) Frequency Range Speaker
Unit of Measure
Items AR Mobile Series 300 ~ 7000 Hertz (Hz) Frequency Range Speaker
AR01232MS-SC12-WP-R
AR Mobile Series 300 ~ 7000 Hertz (Hz) Frequency Range Speaker
List Price {QUOTE}
 AR Mobile Series 20 ~ 10000 Hertz (Hz) Frequency Range Speaker
AR027150MR-2-R
AR Mobile Series 20 ~ 10000 Hertz (Hz) Frequency Range Speaker
List Price {QUOTE}
 AR Mobile Series 60 ~ 10000 Hertz (Hz) Frequency Range Speaker
AR03032MR-R
AR Mobile Series 60 ~ 10000 Hertz (Hz) Frequency Range Speaker
List Price {QUOTE}
 AR Mobile Series 100 ~ 10000 Hertz (Hz) Frequency Range Speaker
AR040600MR-LW100-R
AR Mobile Series 100 ~ 10000 Hertz (Hz) Frequency Range Speaker
List Price {QUOTE}
Manufacturer Stock N/A {0} N/A {0} N/A {0} N/A {0}
Description N/A PUI Audio?'s Mobile Series line of speakers and receivers is designed for cutting-edge applications such as smart watches and pendants, Wi-Fi enabled security devices and action cameras, mobile radios and smart phones, as well as IoT devices. Each Mobile Series product features an IP67-rated face for protection against dust and water ingress.

The 32 ohm 12 mm x 6 mm AR01232MS-SC12-WP-R receiver is designed for high fidelity audio reproduction in near-phone and headphone applications. Spring contacts and a 2 mm thickness make mounting easy, even in the thinnest applications. 		N/A N/A N/A
Brands N/A PUI Audio™
Manufacturer N/A PUI Audio�, Inc.
Rated Input Power N/A 20 mW N/A 0.015 W N/A 0.02 W N/A 0.01 W
Maximum Input Power N/A 30 mW N/A 0.03 W N/A 0.03 W N/A 0.02 W
Impedance N/A 32 Ω N/A 150 Ω N/A 32 Ω N/A 600 Ω
Impedance Tolerance (±) N/A 15 %
Sound Pressure Level (SPL) Output N/A N/A 118 dBA N/A 115 dBA N/A 120 dBA
Sound Pressure Level (SPL) Output Tolerance (±) N/A N/A 3 dBA N/A 3 dBA N/A 3 dBA
Note for Sound Pressure Level (SPL) Output N/A N/A at 0.001 W using
IEC 318 Coupler (AT 1.0 kHz) 		N/A at 1.0 KHz, 1 cm, 1 mW N/A at 1 KHz, 179 mV (IEC 318 Coupler)
Maximum Distortion N/A N/A 5 % N/A 5 % N/A 5 %
Sensitivity N/A 117 dB·Pa/V N/A N/A N/A
Sensitivity Tolerance (±) N/A 3 dB·Pa/V N/A N/A N/A
Testing Condition for Sensitivity N/A Sound Pressure Level (SPL) at 1 kHz
800 mV in Type 3.2 HL Ear 		N/A N/A N/A
Resonant Frequency N/A 450 Hz N/A N/A N/A
Resonant Frequency Tolerance (±) N/A 20 % N/A N/A N/A
Note for Resonant Frequency Tolerance (±) N/A 800 mV in Free Air N/A N/A N/A
Frequency Range N/A 300 ~ 7000 Hz N/A 20 ~ 10000 Hz N/A 60 ~ 10000 Hz N/A 100 ~ 10000 Hz
Housing Material N/A N/A Acrylonitrile Butadiene Styrene (ABS) N/A Acrylonitrile Butadiene Styrene (ABS) N/A Plastic
Cone Material N/A N/A Mylar® N/A Mylar® N/A Mylar®
Magnet Material N/A Neodymium (NdFeB)
Frame Material N/A Polyphthalamide (PPA) N/A N/A N/A
Weight N/A 0.4 g N/A 5.2 g N/A 5.8 g N/A 7.5 g
Environmental Protection N/A Ingress Protection (IP67) N/A N/A N/A
Buzz, Rattle, etc. N/A Should not be audible with 20 mW sine wave from 300 Hz to 7 kHz N/A N/A N/A
Polarity N/A When Positive Voltage is Applied to the Positive Terminal, the Diaphragm will Move Outward N/A N/A N/A
Operating Temperature N/A -40 ~ +80 ºC N/A -20 ~ +60 ºC N/A -20 ~ +60 ºC N/A -30 ~ +70 ºC
High Temperature Test N/A 96 hours at +80 ºC ± 3 ºC followed by three hours in normal room temperature N/A N/A N/A
Low Temperature Test N/A 96 hours at -40 ºC ± 3 ºC followed by three hours in normal room temperature N/A N/A N/A
Humidity Test N/A 96 hours at +40 ºC ± 3 ºC with relative humidity at 95% followed by 3 hours in normal room temperature N/A N/A N/A
Temperature Cycle Test N/A The part shall be subjected to 5 cycles using the following procedure:
Low temperature: -40 ºC ±3 ºC
High temperature: +80 ºC ±3 ºC
Cycle: 1 hour/cycle each 		N/A N/A N/A
Vibration Test N/A 10-55 to 10 Hz sine sweep, 15 minutes per cycle at 5G constant.
2 hours in each axis X, Y, and Z. 		N/A N/A N/A
Drop Test N/A Drop the speakers onto a 20 mm thick board 10 times from a height of 100 cm, once each side N/A N/A N/A
Load Test and Maximum Power Test N/A White noise is applied at the speakers rated power for 96 hours at room temperature; max power is applied for 1 minute on, 2 minutes off; 10 cycles. N/A N/A N/A
Note for Reliability Testing N/A After each test, the speaker's SPL shall be ±3 dB of the original SPL N/A N/A N/A
Tolerance (±) N/A 0.5 mm N/A N/A N/A
Angle Tolerance (±) N/A 3 º N/A N/A N/A
Industry Standards N/A Restriction of Hazardous Substances (RoHS) 2011/65/EU
Features N/A
  • Custom-molded poly cone designed for voice articulation
  • High 116 dB output with 800mV in Artificial Ear (1cm)
  • High energy neodymium motor
  • Only 2 mm thick
  • Dustproof and waterproof IP67-rated face
 		N/A N/A N/A
Note N/A Specifications subject to change or withdrawal without notice.