PUI - Projections Unlimited, Inc. - KXG Series Miniature Aluminum Electrolytic Capacitors

Unit of Measure

Items	EKXG201ELL101ML20S KXG Series 100 Microfarad (?F) Capacitance and 16 Millimeter (mm) Diameter (D) Miniature Aluminum Electrolytic Capacitor List Price {QUOTE}	EKXG201ELL221MM25S KXG Series 220 Microfarad (?F) Capacitance and 18 Millimeter (mm) Diameter (D) Miniature Aluminum Electrolytic Capacitor List Price {QUOTE}	EKXG201ELL331MMP1S KXG Series 330 Microfarad (?F) Capacitance and 18 Millimeter (mm) Diameter (D) Miniature Aluminum Electrolytic Capacitor List Price {QUOTE}	EKXG201ELL680MK20S KXG Series 68 Microfarad (?F) Capacitance and 12.5 Millimeter (mm) Diameter (D) Miniature Aluminum Electrolytic Capacitor List Price {QUOTE}	EKXG251ELL101ML25S KXG Series 100 Microfarad (?F) Capacitance and 16 Millimeter (mm) Diameter (D) Miniature Aluminum Electrolytic Capacitor List Price {QUOTE}
Manufacturer Stock	N/A {0}	N/A {0}	N/A {0}	N/A {0}	N/A {0}
Description	N/A For electronic ballast circuits and other long life applications Non solvent resistant type
Brands	N/A Nippon Chemi-Con
Manufacturer	N/A United Chemi-Con
Series	N/A KXG
Working Direct Current (DC) Voltage	N/A 200 V	N/A 200 V	N/A 200 V	N/A 200 V	N/A 250 V
Capacitance	N/A 100 µF	N/A 220 µF	N/A 330 µF	N/A 68 µF	N/A 100 µF
Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature	N/A 20 %
Diameter (D)	N/A 16 mm	N/A 18 mm	N/A 18 mm	N/A 12.5 mm	N/A 16 mm
Maximum Diameter (D)	N/A 16.5 mm	N/A 18.5 mm	N/A 18.5 mm	N/A 13 mm	N/A 16.5 mm
Dimension L	N/A 20 mm	N/A 25 mm	N/A 35.5 mm	N/A 20 mm	N/A 25 mm
Maximum Dimension L	N/A 21.5 mm	N/A 26.5 mm	N/A 37 mm	N/A 21.5 mm	N/A 26.5 mm
Diameter (d)	N/A 0.8 mm	N/A 0.8 mm	N/A 0.8 mm	N/A 0.6 mm	N/A 0.8 mm
Dimension F	N/A 7.5 mm	N/A 7.5 mm	N/A 7.5 mm	N/A 5 mm	N/A 7.5 mm
Dissipation Factor (Tan δ)	N/A 0.20
Rated Ripple Current at 105 Degree Celsius (ºC) Temperature, 120 Hertz (Hz) Frequency	N/A 630 mArms	N/A 1050 mArms	N/A 1430 mArms	N/A 475 mArms	N/A 680 mArms
Rated Ripple Current at 105 Degree Celsius (ºC) Temperature, 100 Kilohertz (kHz) Frequency	N/A 1420 mArms	N/A 2365 mArms	N/A 3220 mArms	N/A 1175 mArms	N/A 1530 mArms
Temperature Range	N/A -40 to +105 ºC
Leakage Current at 20 Degree Celsius (ºC) Temperature After 1 Minute	N/A I=0.04CV+100 Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
Leakage Current at 20 Degree Celsius (ºC) Temperature After 5 Minutes	N/A I=0.02CV+25 Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
Maximum Impedance Ratio Low Temperature Characteristics at 120 Hertz (Hz) Frequency	N/A Z(-25 ºC)/Z(+20 ºC) = 3 Z(-40 ºC)/Z(+20 ºC) = 6
Endurance at 105 Degree Celsius (ºC) Temperature¹	N/A 8000 to 10000 hours
Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency	N/A 1
Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency	N/A 1.67	N/A 1.67	N/A 1.67	N/A 1.75	N/A 1.67
Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency	N/A 2.05	N/A 2.05	N/A 2.05	N/A 2.25	N/A 2.05
Rated Ripple Current Multipliers at 100 Kilohertz (kHz) Frequency	N/A 2.25	N/A 2.25	N/A 2.25	N/A 2.50	N/A 2.25
Note for Rated Ripple Current Multipliers	N/A The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every ºC rise. When long life performance is required in actual use, the rms ripple current has to be reduced.
Industry Standards	N/A Restriction of Hazardous Substances (RoHS) 2 Compliant
Endurance	N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 10,000 hours (8,000 hours for Ø10) at 105 ºC. Capacitance change: ≤ ±20% of the initial value D.F. (tan δ): ≤ 200% of the initial value Leakage current: ≤ The initial specified value
Shelf Life	N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after exposing them for 1,000 hours at 105 ºC without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change: ≤ ±20% of the initial value D.F. (tan δ): ≤ 200% of the initial value Leakage current: ≤ 500 of the initial specified value
Note	N/A Product specifications are subject to change without notice. Request our product specifications before purchase and/or use. Please use our products based on the information contained in product specifications.
¹ With ripple current