PUI - Projections Unlimited, Inc. - KMG Series Miniature Aluminum Electrolytic Capacitors

Unit of Measure

Items	EKMG101ELL101MJ20S KMG Series 100 Microfarad (?F) Capacitance and 100 Volt (V) Working Direct Current (DC) Voltage Miniature Aluminum Electrolytic Capacitor List Price {QUOTE}	EKMG101ELL1R0ME11D KMG Series 1 Microfarad (?F) Capacitance and 100 Volt (V) Working Direct Current (DC) Voltage Miniature Aluminum Electrolytic Capacitor List Price {QUOTE}	EKMG160ELL102MJ16S KMG Series 1000 Microfarad (?F) Capacitance and 16 Volt (V) Working Direct Current (DC) Voltage Miniature Aluminum Electrolytic Capacitor List Price {QUOTE}	EKMG160ELL471MHB5D KMG Series 470 Microfarad (?F) Capacitance and 16 Volt (V) Working Direct Current (DC) Voltage Miniature Aluminum Electrolytic Capacitor List Price {QUOTE}	EKMG250ELL101MF11D KMG Series 100 Microfarad (?F) Capacitance and 25 Volt (V) Working Direct Current (DC) Voltage Miniature Aluminum Electrolytic Capacitor List Price {QUOTE}
Manufacturer Stock	N/A {0}	N/A {0}	N/A {0}	N/A {0}	N/A {0}
Description	N/A Solvent resistant type except 350 to 450 V_dc
Brands	N/A Nippon Chemi-Con
Manufacturer	N/A United Chemi-Con
Series	N/A KMG
Working Direct Current (DC) Voltage	N/A 100 V	N/A 100 V	N/A 16 V	N/A 16 V	N/A 25 V
Capacitance	N/A 100 µF	N/A 1 µF	N/A 1000 µF	N/A 470 µF	N/A 100 µF
Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature	N/A 20 %
Diameter (D)	N/A 10 mm	N/A 5 mm	N/A 10 mm	N/A 8 mm	N/A 6.3 mm
Maximum Diameter (D)	N/A 10.5 mm	N/A 5.5 mm	N/A 10.5 mm	N/A 8.5 mm	N/A 6.8 mm
Dimension L	N/A 20 mm	N/A 11 mm	N/A 16 mm	N/A 11.5 mm	N/A 11 mm
Maximum Dimension L	N/A 21.5 mm	N/A 12.5 mm	N/A 17.5 mm	N/A 13 mm	N/A 12.5 mm
Diameter (d)	N/A 0.6 mm	N/A 0.5 mm	N/A 0.6 mm	N/A 0.6 mm	N/A 0.5 mm
Dimension F	N/A 5 mm	N/A 2 mm	N/A 5 mm	N/A 3.5 mm	N/A 2.5 mm
Dissipation Factor (Tan δ)	N/A 0.08	N/A 0.08	N/A 0.20	N/A 0.20	N/A 0.16
Rated Ripple Current at 105 Degree Celsius (ºC) Temperature, 120 Hertz (Hz) Frequency	N/A 265 mArms	N/A 15 mArms	N/A 560 mArms	N/A 310 mArms	N/A 130 mArms
Temperature Range	N/A -55 to +105 ºC
Leakage Current at 20 Degree Celsius (ºC) Temperature After 1 Minute	N/A I=0.03CV or 4 µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
Maximum Impedance Ratio Low Temperature Characteristics at 120 Hertz (Hz) Frequency	N/A Z(-25 ºC)/Z(+20 ºC) = 2 Z(-40 ºC)/Z(+20 ºC) = 3	N/A Z(-25 ºC)/Z(+20 ºC) = 2 Z(-40 ºC)/Z(+20 ºC) = 3	N/A Z(-25 ºC)/Z(+20 ºC) = 3 Z(-40 ºC)/Z(+20 ºC) = 8	N/A Z(-25 ºC)/Z(+20 ºC) = 3 Z(-40 ºC)/Z(+20 ºC) = 8	N/A Z(-25 ºC)/Z(+20 ºC) = 2 Z(-40 ºC)/Z(+20 ºC) = 5
Rated Ripple Current Multipliers at 50 Hertz (Hz) Frequency	N/A 0.80	N/A 0.65	N/A 0.80	N/A 0.80	N/A 0.80
Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency	N/A 1
Rated Ripple Current Multipliers at 300 Hertz (Hz) Frequency	N/A 1.15	N/A 1.35	N/A 1.15	N/A 1.15	N/A 1.15
Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency	N/A 1.30	N/A 1.75	N/A 1.30	N/A 1.30	N/A 1.30
Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency	N/A 1.40	N/A 2.30	N/A 1.40	N/A 1.40	N/A 1.40
Rated Ripple Current Multipliers at 100 Kilohertz (kHz) Frequency	N/A 1.50	N/A 2.50	N/A 1.50	N/A 1.50	N/A 1.50
Note for Rated Ripple Current Multipliers	N/A The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 ºC rise. When long life performance is required in actual use, the rms ripple current has to be reduced.
Endurance at 105 Degree Celsius (ºC) Temperature¹	N/A 1000 to 2000 hours
Industry Standards	N/A Restriction of Hazardous Substances (RoHS) Compliant
Endurance	N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 1,000 hours (2,000 hours to meet the following two conditions 160V_dc and larger Ø12.5 and larger) at 105 ºC. Capacitance change: ≤ ±20% of the initial value D.F. (tan δ): ≤ 200% of the initial specified value Leakage current: ≤ The initial specified value
Shelf Life	N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after exposing them for 1,000 hours at 105 ºC without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change: ≤ ±20% of the initial value D.F. (tan δ): ≤ 200% of the initial specified value Leakage current: ≤ The initial specified value
Note	N/A Product specifications are subject to change without notice. Request our product specifications before purchase and/or use. Please use our products based on the information contained product specifications.
¹ With ripple current