Request Information
Third generation power MOSFETs from Vishay provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness.

The TO-220AB package is universally preferred for all commercial-industrial applications at power dissipation levels to approximately 50 W. The low thermal resistance and low package cost of the TO-220AB contribute to its wide acceptance throughout the industry.
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A VISHAY®

Manufacturer

 N/A VISHAY�

Industry Standards

 N/A Restriction of Hazardous Substances (RoHS) Compliant

Absolute Maximum Ratings (TC = 25 Degree Celsius (ºC), Unless Otherwise Noted)

Drain-Source Voltage (VDS)

 N/A 500 V

Gate-Source Voltage Tolerance (±) (VGS)

 N/A 20 V
Continuous Drain Current (ID) at TC = 25 Degree Celsius (ºC) Temperature1 N/A 8 A
Continuous Drain Current (ID) at TC = 100 Degree Celsius (ºC) Temperature2 N/A 5.1 A
Pulsed Drain Current (IDM)3 N/A 32 A

Linear Derating Factor

 N/A 1 W/ºC
Single Pulse Avalanche Energy (EAS)4 N/A 510 MJ
Repetitive Avalanche Current (IAR)5 N/A 8 A
Repetitive Avalanche Energy (EAR)6 N/A 13 MJ

Maximum Power Dissipation (PD) at TC = 25 Degree Celsius (ºC) Temperature

 N/A 125 W
Peak Diode Recovery (dV/dt)7 N/A 3.5 V/ns

Operational Junction and Storage Temperature Range (Tj = Tstg)

 N/A -55 to 150 ºC
Soldering Recommendations (Peak Temperature)8 N/A 300 ºC
Mounting Torque9 N/A 10 ibf·in1.1 N·m

Thermal Resistance Ratings

Maximum Thermal Resistance Junction to Ambient (RthJA)

 N/A 62 ºC/W

Typical Thermal Resistance Case to Sink, Flat, and Greased Surface (RthCS)

 N/A 0.50 ºC/W

Maximum Thermal Resistance (Junction to Case (Drain)) (RthJC)

 N/A 1 ºC/W

Features

Features

 N/A
  • Dynamic dV/dt rating
  • Repetitive avalanche rated
  • Fast switching
  • Ease of paralleling
  • Simple drive requirements

Note

Note

 N/A Datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in the datasheet for details
Lead-Free
Halogen-Free
  • 1 VGS at 10 V
  • 2 VGS at 10 V
  • 3 Repetitive rating; pulse width limited by maximum junction temperature
  • 4 VDD = 50 V, starting TJ = 25 ºC, L = 14 mH, Rg = 25 Ω, IAS = 8.0 A
  • 5 Repetitive rating; pulse width limited by maximum junction temperature
  • 6 Repetitive rating; pulse width limited by maximum junction temperature
  • 7 ISD ≤ 8 A, dI/dt ≤ 100 A/µs, VDD ≤ VDS, TJ ≤ 150 ºC
  • 8 For 10 s
    1.6 mm from case
  • 9 6-32 or M3 Screw