Request Information
  • Side-firing electromechanical transducer designed for 2 to 5 Vp-p
  • Small 7.5 x 7.5 mm footprint and 2 mm height for thin, modern devices
  • 85 dBA minimum output (3.6 Vp-p at 10 cm) and 2.7 kHz resonant frequency
  • Designed for reflow soldering using a lead-free profile
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A PUI Audio™

Manufacturer

 N/A PUI Audio�, Inc.

Peak-to-Peak Rated Voltage (Vp-p)

 N/A 3.6 V

Peak-to-Peak Operating Voltage Range (Vp-p)

 N/A 2 ~ 5 V

Maximum Rated Current

 N/A 120 mA

Coil Resistance

 N/A 12 Ω

Coil Resistance Tolerance (±)

 N/A 2 Ω

Minimum Sound Pressure Level (SPL) at 10 Centimeter (cm)

 N/A 85 dBA

Resonant Frequency

 N/A 2700 Hz

Resonant Frequency Tolerance (±)

 N/A 500 Hz

Operating Temperature

 N/A -30 ~ +70 ºC

Storage Temperature

 N/A -40 ~ +85 ºC

Housing Material

 N/A Liquid Crystal Polymers (LCP)

Terminal Material

 N/A Tin (Sn) Plated Phosphor Bronze

Type

 N/A Electro-Mech

Size

 N/A 7.5 mm

Tolerance (±)

 N/A 0.5 mm

Angle Tolerance (±)

 N/A 3 º

Weight

 N/A 0.33 g

Industry Standards

 N/A Conflict-Free Sourcing Initiative (CFSI) Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) Restriction of Hazardous Substances (RoHS) 2009/65/EC

Mechanical and Environment Testing

High Temperature Test

 N/A 85 ºC (±2 ºC) with random humidity for 96 hours

Low Temperature Test

 N/A -40 ºC (±2 ºC) with random humidity for 96 hours

Humidity Test

 N/A 25 ºC to 60 ºC with 90% to 95% relative humidity for 12 hours, 10 cycles

Vibration Test

 N/A 1.53 mm movement modulated at 10-55 Hz in 3 directions for 6 hours

Drop Test

 N/A 120 cm free fall in six directions, 3 cycles

Temperature Cycle Test

 N/A -30 ºC to 70 ºC, five 90 minute cycles

Note for Mechanical and Environment Testing

 N/A After testing, part shall rest for two hours and then be tested for a clean, pure tone.

Note

Note

 N/A PUI Audio™ Inc. engages in continuous product improvement. All specifications are subject to change without notice.