Request Information
  • 15 mm square micro dynamic surface mount speaker with 87 dB sensitivity
  • 0.5 W continuous, 0.8 W maximum power handling and 8 ? impedance
  • Kapton? cone for wide frequency response and LCP housing for reflow soldering
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A PUI Audio™

Manufacturer

 N/A PUI Audio�, Inc.

Rated Input Power

 N/A 0.5 W

Maximum Input Power

 N/A 0.8 W

Impedance

 N/A 8 Ω

Impedance Tolerance (±)

 N/A 15 %

Output Sound Pressure Level (SPL) at 0.5 Watt (W), 0.1 Meter (m)

 N/A 87 dBA

Output Sound Pressure Level (SPL) Tolerance (±) at 0.5 Watt (W), 0.1 Meter (m)

 N/A 3 dBA

Maximum Distortion

 N/A 5 %

Resonant Frequency

 N/A 800 Hz

Resonant Frequency Tolerance (±)

 N/A 20 %

Frequency Range

 N/A 500 ~ 10000 Hz

Housing Material

 N/A Liquid Crystal Polymers (LCP)

Cone Material

 N/A Kapton®

Magnet Material

 N/A Samarium Cobalt (SmCo)

Operating Temperature

 N/A -30 ~ +85 ºC

Industry Standards

 N/A Conflict-Free Sourcing Initiative (CFSI) Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) Restriction of Hazardous Substances (RoHS) 2002/95/EC

Weight

 N/A 1.5 g

Mechanical Reliability and Environment Testing

High Temperature Test

 N/A 85 ºC with random humidity for 96 hours

Low Temperature Test

 N/A -40 ºC with random humidity for 96 hours

Humidity Test

 N/A 25 ºC to 65 ºC with 90% to 95% relative humidity for 96 hours

Vibration Test

 N/A 5G movement modulated at 10-55 Hz for 2 hours each axis, 6 hours total

Drop Test

 N/A 75 cm free fall on to 40 mm thick board, 10 cycles

Temperature Cycle Test

 N/A -40 ºC to 85 ºC, 5 cycles

Note for Mechanical and Environment Testing

 N/A After tests, speaker shall rest for 1 hours. SPL shall not deviate ±3 dB from pre-test measurement.

Note

Note

 N/A Specifications subject to change or withdrawal without notice.