Though extremely small, the SMT-0440 series transducers are constructed almost exactly the same as electro-mechanical transducers three times their size. What this means for users is that PUI Audio is leveraging their decades of tried-and-true transducer design into each and every one of these, for the designer's piece of mind.
The 4 mm square by 2 mm high SMT-0440-T-R top-firing electro-mechanical transducer features a minimum SPL of 70 dBA at 10 cm with only 3V (0-peak) input at 4 kHz.
The 4 mm square by 2 mm high SMT-0440-T-R top-firing electro-mechanical transducer features a minimum SPL of 70 dBA at 10 cm with only 3V (0-peak) input at 4 kHz.
Unit of Measure
Specifications
Available |
N/A {0} |
Manufacturer Stock |
N/A {0} |
Brands |
N/A PUI Audio™ |
Manufacturer |
N/A PUI Audio�, Inc. |
Rated Voltage (V0-p) |
N/A 3 V |
Operating Voltage Range (V0-p) |
N/A 2 ~ 4 V |
Impedance |
N/A 17 Ω |
Impedance Tolerance (±) |
N/A 3 % |
Minimum Sound Pressure Level (SPL) at 10 Centimeter (cm) |
N/A 70 dBA |
Resonant Frequency |
N/A 4000 Hz |
Resonant Frequency Tolerance (±) |
N/A 500 Hz |
Maximum Current Draw1 | N/A 90 mA |
Housing Material |
N/A Liquid Crystal Polymers (LCP) |
Terminal Material |
N/A Tin Plated Brass |
Operating Temperature |
N/A -20 ~ +70 ºC |
Storage Temperature |
N/A -30 ~ +80 ºC |
Size |
N/A 4 mm |
Tolerance (±) |
N/A 0.5 mm |
Angle Tolerance (±) |
N/A 3 º |
Weight |
N/A 0.1 g |
Industry Standards |
N/A Restriction of Hazardous Substances (RoHS) 2011/65/EU |
Reliability Testing
High Temperature Test |
N/A 96 hours at +70 ºC ± 2 ºC followed by two hours in normal room temperature |
Low Temperature Test |
N/A 96 hours at -20 ºC ± 2 ºC followed by two hours in normal room temperature |
Humidity Test |
N/A 25 ± 2 ºC at 90-95% RH for 5 hr, then to 55 ± 2 ºC at 90-95% RH for 5 hr, then to 25 ºC ± 2 ºC at 90-95% RH for 0.5 hr, 10 cycles |
Vibration Test |
N/A 10-50 to 10 Hz in three perpendicular directions for two hours each. |
Drop Test |
N/A Drop transducer from a 70 cm height onto a 10 mm thick wooden board in three directions. |
Note for Reliability Testing |
N/A After each test, the part's SPL, frequency response, and current draw shall meet specifications. |
- 1 Rated voltage, 50% duty cycle, at resonant frequency
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.Ok