- Low impedance
- Solvent resistant type
- Vibration resistant structure
- AEC-Q200 compliant
Unit of Measure
Specifications
Available |
N/A {0} |
Manufacturer Stock |
N/A {0} |
Brands |
N/A Nippon Chemi-Con |
Manufacturer |
N/A United Chemi-Con |
Series |
N/A Alchip™-MZA |
Working Direct Current (DC) Voltage |
N/A 35 V |
Capacitance |
N/A 220 µF |
Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature |
N/A 20 % |
Maximum Impedance at 100 Kilohertz (kHz) Frequency and 20 Degree Celsius (ºC) Temperature |
N/A 0.16 Ω |
Rated Ripple Current at 105 Degree Celsius (ºC) Temperature, 100 Kilohertz (kHz) Frequency |
N/A 600 mArms |
Temperature Range |
N/A -55 to +105 ºC |
Leakage Current at 20 Degree Celsius (ºC) Temperature After 2 Minutes |
N/A
I=0.01CV or 3 µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) |
Maximum Dissipation Factor (Tan δ) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature |
N/A 0.12 |
Maximum Impedance Ratio Low Temperature Characteristics at 120 Hertz (Hz) Frequency |
N/A Z(-25 ºC)/Z(+20 ºC) = 2 Z(-40 ºC)/Z(+20 ºC) = 3 Z(-55 ºC)/Z(+20 ºC) = 3 |
Mounting Style |
N/A Surface Mount |
Industry Standards |
N/A Restriction of Hazardous Substances (RoHS) 2 Compliant |
Dimensions
Dimension D |
N/A 8 mm |
Dimension L |
N/A 10 mm |
Dimension L Tolerance (±) |
N/A 0.5 mm |
Dimension A |
N/A 8.3 mm |
Dimension B |
N/A 8.3 mm |
Dimension C |
N/A 9 mm |
Dimension W |
N/A 0.7 to 1.1 mm |
Dimension P |
N/A 3.1 mm |
Rated Ripple Current Multipliers
Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency |
N/A 0.50 |
Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency |
N/A 0.85 |
Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency |
N/A 0.94 |
Rated Ripple Current Multipliers at 100 Kilohertz (kHz) Frequency |
N/A 1 |
Note for Rated Ripple Current Multipliers |
N/A The deterioration of aluminum electrolytic capacitors accelerates their life due to the internal heating produced by ripple current. |
Endurance
Endurance |
N/A
The following specifications shall be satisfied when the capacitors are restored to 20 ºC after the rated voltage is applied for the specified time at 105 ºC. Time: 2,000 hours Capacitance change: ≤ ±30% of the initial value D.F. (tan δ): ≤ 200% of the initial value Leakage current: ≤ The initial specified value |
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.Ok