Request Information
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A American Zettler®

Manufacturer

 N/A American Zettler�

Contacts

Arrangement

 N/A Single Pole Double Throw (SPDT) (1 Form C) Single Pole Single Throw (SPST) (Normally Close (NC)) (1 Form B) Single Pole Single Throw (SPST) (Normally Open (NO)) (1 Form A)

Maximum Switched Power Resistive Load Rating (Single Pole Single Throw (SPST) Form A)

 N/A 1120 W

Maximum Switched Power Resistive Load Rating (Normally Open (NO) Form C)

 N/A 840 W

Maximum Switched Power Resistive Load Rating (Normally Close (NC) Form C, Form B)

 N/A 840 W

Maximum Switched Current Resistive Load Rating (Single Pole Single Throw (SPST) Form A)

 N/A 80 A

Maximum Switched Current Resistive Load Rating (Normally Open (NO) Form C)

 N/A 60 A

Maximum Switched Current Resistive Load Rating (Normally Close (NC) Form C, Form B)

 N/A 60 A

Maximum Switched Direct Current (DC) Voltage Resistive Load Rating

 N/A 75 V

Material

 N/A Silver Tin Oxide
Initially Resistance1 N/A < 50 mΩ

General Data

Mechanical Life Expectancy (Minimum Operations)

 N/A 1 x 107

Electrical Life Expectancy (Minimum Operations)

 N/A 1 x 105 at 80 Ampere (A) and 14 Direct Current (DC) Voltage Respectively

Operate Time (Typical)

 N/A 7 Millisecond (ms) at Nominal Coil Voltage

Release Time (Typical)

 N/A 5 Millisecond (ms) at Nominal Coil Voltage (with no Coil Suppression)

Dielectric Strength at Sea Level for 1 Minute (min)

 N/A 500 Root Mean Square (RMS) Voltage (VRMS) Coil to Contact 500 Root Mean Square (RMS) Voltage (VRMS) Contact Open Contacts

Insulation Resistance

 N/A 100 Megaohm (MΩ) Minimum at 500 Direct Current (DC) Voltage,20 Degree Celsius (ºC) 50 Percent (%) RH

Dropout

 N/A Greater than 10 Percent (%) of Nominal Coil Voltage

Operating Ambient Temperature at Nominal Coil Voltage

 N/A -40 to 85 ºC-40 to 185 ºF

Storage Ambient Temperature at Nominal Coil Voltage

 N/A -40 to 105 ºC-40 to 221 ºF

Vibration at 10 to 55 Hertz (Hz)

 N/A 0.062 in. DA

Shock

 N/A 10 g

Enclosure

 N/A Polyamide (PA) (Underwriter Laboratories (UL) 94: V-0)

Terminals

 N/A Copper Alloy Printed Circuit Board (PCB)

Maximum Solder Temperature

 N/A 270 ºC518 ºF

Maximum Solder Time

 N/A 5 seconds

Maximum Solvent Temperature

 N/A 80 ºC176 ºF

Maximum Immersion Time

 N/A 30 seconds

Weight

 N/A 40 g

Coil Specification

Power at Pickup Voltage (Typical)

 N/A 0.76 W

Maximum Continuous Power Dissipation

 N/A 3 W

Temperature Rise

 N/A 68 ºC122 ºF

Maximum Temperature

 N/A 155 ºC311 ºF

Nominal Coil Direct Current (DC) Voltage

 N/A 24 V

Must Operate Direct Current (DC) Voltage

 N/A 15.6 V

Maximum Continuous Direct Current (DC) Voltage

 N/A 31.2 V

Coil Resistance (±) 10 Percent (%)

 N/A 320

Features

Features

 N/A
  • PCB terminals
  • 80 Amp contact rating
  • High momentary carry current
  • High operating temperature (85°C)
  • SPST N.O. (1 Form A), SPDT (1 Form C), SPST N.C. (1 Form B)
  • ISO/TS 16949, ISO14001
  • Epoxy sealed version available

Note

Note

 N/A
  1. All values at 20ºC (68ºF).
  2. Relay may pull in with less than "Must Operate" value.
  3. Specifications subject to change without notice.
  • 1 24 V, 1 A voltage drop method