Request Information
The SMH series capacitors are the standard 85 ?C, large capacitance, snap-in capacitors from United Chemi-Con. The load life for the SMH series is 2,000 hours at 85 ?C with the rated ripple current applied. The very high CV values and ripple current capabilities make these capacitors ideal for use in power supply filter circuits. The SMH capacitors are available in 2 or 4-pin snap-in styles and 4 or 5-pin straight terminals. The SMH series is RoHS compliant offering Pb-free construction.
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A United Chemi-Con

Manufacturer

 N/A United Chemi-Con

Series

 N/A SMH

Working Direct Current (DC) Voltage

 N/A 100 V

Capacitance

 N/A 10000 µF

Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature

 N/A 20 %

Temperature Range

 N/A -40 to +85 ºC

Leakage Current at 20 Degree Celsius (ºC) Temperature After 5 Minutes

 N/A I=0.02CV 3 µA or 3 mA, whichever is smaller.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)

Maximum Dissipation Factor (Tan δ) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature

 N/A 0.15

Maximum Impedance Ratio Low Temperature Characteristics at 120 Hertz (Hz) Frequency

 N/A Impedance (Z) ratio between the -25 ºC or -40 ºC value and +20 ºC value shall not exceed the values given below.

Z(-25 ºC)/Z(+20 ºC) = 2
Z(-40 ºC)/Z(+20 ºC) = 5
Rated Lifetime1 N/A 2000 hours

Terminal Type

 N/A Snap-in Pins

Pin Length

 N/A 5.8 mm

Dummy Terminals

 N/A 2 Dummy Terminals

Supplement Type

 N/A Pb-free PVC sleeve with end disk

Industry Standards

 N/A Restriction of Hazardous Substances (RoHS) Compliant

Dimensions

Dimension D

 N/A 35 mm

Dimension L

 N/A 63 mm

Rated Ripple Current Multipliers

Rated Ripple Current Multipliers at +45 Degree Celsius (ºC) Ambient Temperature

 N/A 1.73

Rated Ripple Current Multipliers at +60 Degree Celsius (ºC) Ambient Temperature

 N/A 1.50

Rated Ripple Current Multipliers at +70 Degree Celsius (ºC) Ambient Temperature

 N/A 1.32

Rated Ripple Current Multipliers at +85 Degree Celsius (ºC) Ambient Temperature

 N/A 1

Rated Ripple Current Multipliers at 50 Hertz (Hz) Frequency

 N/A 0.92

Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency

 N/A 1

Rated Ripple Current Multipliers at 300 Hertz (Hz) Frequency

 N/A 1.07

Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency

 N/A 1.13

Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency

 N/A 1.19

Rated Ripple Current Multipliers at 100 Kilohertz (kHz) Frequency

 N/A 1.20

Endurance

Endurance

 N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjecting them to DC voltage for 2,000 hours at 85 ºC with the rated ripple current applied. The sum of the DC voltage and peak AC voltage must not exceed the full rated voltage of the capacitors.

Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ 200% of the initial value
Leakage current: ≤ The initial specified value

Shelf Life

Shelf Life

 N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after exposing them for 1,000 hours at 85 ºC without voltage applied. The rated voltage shall be applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than 48 hours before the measurements.

Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ 150% of the initial value
Leakage current: ≤ The initial specified value

Features

Features

 N/A
  • Snap Mount
  • Large Capacitance
  • High CV
  • High Ripple
  • +85 ºC Maximum Temperature

Additional Information

Additional Information

 N/A The standard SMH series capacitors are not solvent proof. Refer to guidelines and precautions on the website for usage and installation conditions recommended for United Chemi-Con products.
  • 1 At +85 ºC with the rated ripple current applied.