Request Information
  • Standard
  • ?4 through ?18 case sizes are fully lined up
  • Suitable to fit for downsized equipment
  • Solvent resistant type except 100 to 450 Vdc
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A Nippon Chemi-Con

Manufacturer

 N/A United Chemi-Con

Series

 N/A Alchip™-MVA

Working Direct Current (DC) Voltage

 N/A 35 V

Capacitance

 N/A 100 µF

Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature

 N/A 20 %

Dissipation Factor (Tan δ)

 N/A 0.14

Rated Ripple Current at +85 Degree Celsius (ºC) Temperature, 120 Hertz (Hz) Frequency

 N/A 120 mArms

Temperature Range

 N/A -40 to +85 ºC

Leakage Current at 20 Degree Celsius (ºC) Temperature After 2 Minutes

 N/A I=0.01CV or 3 µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)

Maximum Impedance Ratio Low Temperature Characteristics at 120 Hertz (Hz) Frequency

 N/A Z(-25 ºC)/Z(+20 ºC) = 3 Z(-40 ºC)/Z(+20 ºC) = 3

Mounting Style

 N/A Surface Mount

Industry Standards

 N/A Restriction of Hazardous Substances (RoHS) 2 Compliant

Dimensions

Dimension D

 N/A 6.3 mm

Dimension L

 N/A 7.7 mm

Dimension L Tolerance (±)

 N/A 0.5 mm

Dimension A

 N/A 6.6 mm

Dimension B

 N/A 6.6 mm

Dimension C

 N/A 7.2 mm

Dimension W

 N/A 0.5 to 0.8 mm

Dimension P

 N/A 1.9 mm

Rated Ripple Current Multipliers

Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency

 N/A 1

Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency

 N/A 1.05

Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency

 N/A 1.08

Rated Ripple Current Multipliers at 100 Kilohertz (kHz) Frequency

 N/A 1.08

Note for Rated Ripple Current Multipliers

 N/A The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 ºC rise.
When long life performance is required in actual use, the rms ripple current has to be reduced.

Endurance

Endurance

 N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after the rated voltage is applied for 2,000 hours at 85 ºC.

Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ 200% of the initial value
Leakage current: ≤ The initial specified value

Shelf Life

Shelf Life

 N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after exposing them for 1,000 hours at 85 ºC without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.

Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ 200% of the initial value
Leakage current: ≤ The initial specified value

Note

Note

 N/A Product specifications are subject to change without notice. Request our product specifications before purchase and/or use. Please use our products based on the information contained in product specifications.