Unit of Measure
Items
TP Series 1 Millimeter (mm) Total Travel Tiny Washable Momentary Pushbutton Switch

TP Series 1 Millimeter (mm) Total Travel Tiny Washable Momentary Pushbutton Switches
List Price {QUOTE}

TP Series 0.8 Millimeter (mm) Total Travel Tiny Washable Momentary Pushbutton Switch

TP Series 0.8 Millimeter (mm) Total Travel Tiny Washable Momentary Pushbutton Switches
List Price {QUOTE}
Manufacturer Stock N/A {0} N/A {0}
Description N/A
Brands N/A APEM
Manufacturer N/A APEM
Series N/A TP
Maximum Alternating Current (AC)/Direct Current (DC) Voltage with Resistive Load N/A 20 V
Maximum Current Rating with Resistive Load N/A 0.4 V·A
Minimum Load N/A 10 mA 50 mV to 10 µA 5 VDC
Maximum Contact Resistance N/A 50 mΩ
Minimum Insulation Resistance at 500 Volt (V) Direct Current (DC) Voltage N/A 1 MΩ
Dielectric Strength N/A 1.000 Root Mean Square (RMS) Voltage (VRMS) 50 Hz minimum between terminals and frame 500 Root Mean Square (RMS) Voltage (VRMS) 50 Hz minimum between terminals
Electrical Life at Full Load N/A 60 cycles
Total Travel N/A 1 mm0.039 in N/A 0.8 mm0.031 in
Maximum Pull-Out Force Strength of Terminals N/A 10 N
Operating Temperature N/A -30 to 85 ºC
Moisture1 N/A 21 Days
Cleaning N/A Solvents or Water + Detergent
Wave Soldering Temperature for 5 Seconds (s) N/A 260 ºC
Case Material N/A Polybutylene Terephthalate (PBT)
Actuator Material N/A Glass Filled Polyamide
Contact Material N/A Gold Plated Brass
Terminal Material N/A Gold Plated Brass
Terminal Seal Material N/A Epoxy
Number of Poles N/A Single
Electrical Function N/A ON - Momentary (Mom) N/A OFF - Momentary (Mom)
Terminals N/A Vertical Mounting Right Angle
Special Options N/A No Special Requirement N/A Extended Terminals
Crimping of Ground Plate Pins N/A N/A Retains switch on PC during handling and wave soldering.
Features N/A
  • Process sealed
    • Single piece case
    • O-ring seal between actuator and bushing
    • Epoxy sealed terminals
  • Wide variety of contact materials
  • Same PCB layout as TL, TR and TG tiny switches
  • 1 95% (NFC 20-603 - IEC 68-2-3)