Item # SMS-1508MS-HT-R, 0.8 Watt (W) Rated Input Power and 92 Decibel (dB) Sensitivity Surface Mount Device (SMD) Speaker On PUI - Projections Unlimited, Inc.

PUI | Global Corporate HQ
15311 Barranca Parkway
Irvine , CA , 92618
United States
Phone:(714) 544-2700
Email: sales@gopui.com

Print Back

List Price

Price Breaks

Unit: Discount Price / %
600 - 1799: 0%
1800 - 2999: 22.22%
3000 - 4199: 36.36%
4200 - 5999: 41.67%
6000 and up: 46.15%

PUI Audio?'s High-Temp line of products is designed to meet and exceed the needs of the automotive industry with ultra-wide operating temperatures.
The SMS-1508MS-HT-R is designed for high output at 800 Hz in a small package.

Wide -40 ?C to +105 ?C operating temperature
92 dB output at 10 cm with 0.8 W input
Wide 400 Hz to 10,000 Hz frequency range

Unit of Measure

Specifications | Mechanical Reliability and Environment Testing | Note

Specifications

Available	N/A
Manufacturer Stock	N/A
Brands	N/A PUI Audio™
Manufacturer	N/A PUI Audio�, Inc.
Rated Input Power	N/A 0.8 W
Maximum Input Power	N/A 1.0 W
Impedance	N/A 8 Ω
Impedance Tolerance (±)	N/A 20 %
Sensitivity	N/A 92 dB
Sensitivity Tolerance (±)	N/A 3 dB
Testing Condition for Sensitivity	N/A at 1 k, 1.6 k, 2.0 k & 3.2 kHz Ave
Resonant Frequency	N/A 800 Hz
Resonant Frequency Tolerance (±)	N/A 15 %
Frequency Range	N/A 400 ~ 10000 Hz
Acceptable Soldering Methods	N/A Hand Solder Reflow
Environmental Compliances	N/A Restriction of Hazardous Substances (RoHS)
Storage Temperature	N/A -40 ~ +105 ºC
Operating Temperature	N/A -40 ~ +105 ºC
Weight	N/A 1.7 g

Mechanical Reliability and Environment Testing

High Temperature Test	N/A Test part at +105 ºC for 120 hours
Low Temperature Test	N/A Test part at -40 ºC for 120 hours
Humidity Test	N/A 40±2 ºC, 90 ~ 95% RH, 120 hours
Vibration Test	N/A The part shall be subjected to a vibration cycle of 10 Hz for a period of 1 minute. Total peak amplitude shall be 1.52 mm (9.3 g). The vibration test shall consist of 2 hours per plane in each three mutually perpendicular planes for a total time of 6 hours.
Shock Test	N/A Sounder shall be measured after being applied a shock of 980 m/s² for each three mutually perpendicular directions to each of 3 times by a half sine wave.
Drop Test	N/A Drop from 700 mm height onto the surface of a 10mm thick wooden board.
Temperature Cycle Test	N/A Total 5 cycles, 1 cycle consisting of -40±2 ºC, 30 minutes 20±5 ºC 15 minutes 105±2 ºC, 30 minutes 20±5 ºC 15 minutes

Note

Note

All specifications must be satisfied after the test.

Specifications subject to change or withdrawal without notice.