Available |
N/A {0} |
Manufacturer Stock |
N/A {0} |
Brands |
N/A Nippon Chemi-Con |
Manufacturer |
N/A United Chemi-Con |
Series |
N/A KXG |
Working Direct Current (DC) Voltage |
N/A 350 V |
Capacitance |
N/A 100 µF |
Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature |
N/A 20 % |
Dissipation Factor (Tan δ) |
N/A 0.24 |
Rated Ripple Current at 105 Degree Celsius (ºC) Temperature, 120 Hertz (Hz) Frequency |
N/A 700 mArms |
Rated Ripple Current at 105 Degree Celsius (ºC) Temperature, 100 Kilohertz (kHz) Frequency |
N/A 1575 mArms |
Temperature Range |
N/A -40 to +105 ºC |
Leakage Current at 20 Degree Celsius (ºC) Temperature After 1 Minute |
N/A
I=0.04CV+100 Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) |
Leakage Current at 20 Degree Celsius (ºC) Temperature After 5 Minutes |
N/A
I=0.02CV+25 Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) |
Maximum Impedance Ratio Low Temperature Characteristics at 120 Hertz (Hz) Frequency |
N/A
Z(-25 ºC)/Z(+20 ºC) = 5 Z(-40 ºC)/Z(+20 ºC) = 6 |
Endurance at 105 Degree Celsius (ºC) Temperature1 | N/A 8000 to 10000 hours |
Industry Standards |
N/A Restriction of Hazardous Substances (RoHS) 2 Compliant |
Diameter (D) |
N/A 18 mm |
Maximum Diameter (D) |
N/A 18.5 mm |
Dimension L |
N/A 25 mm |
Maximum Dimension L |
N/A 26.5 mm |
Diameter (d) |
N/A 0.8 mm |
Dimension F |
N/A 7.5 mm |
Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency |
N/A 1 |
Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency |
N/A 1.67 |
Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency |
N/A 2.05 |
Rated Ripple Current Multipliers at 100 Kilohertz (kHz) Frequency |
N/A 2.25 |
Note for Rated Ripple Current Multipliers |
N/A The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every ºC rise. When long life performance is required in actual use, the rms ripple current has to be reduced. |
Endurance |
N/A
The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 10,000 hours (8,000 hours for Ø10) at 105 ºC. Capacitance change: ≤ ±20% of the initial value D.F. (tan δ): ≤ 200% of the initial value Leakage current: ≤ The initial specified value |
Shelf Life |
N/A
The following specifications shall be satisfied when the capacitors are restored to 20 ºC after exposing them for 1,000 hours at 105 ºC without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change: ≤ ±20% of the initial value D.F. (tan δ): ≤ 200% of the initial value Leakage current: ≤ 500 of the initial specified value |