PUI - Projections Unlimited, Inc. - NPCAP™-PXA Series Conductive Polymer Aluminum Solid Capacitors

Unit of Measure

Items	APXA160ARA181MHC0G NPCAP?-PXA Series 180 Microfarad (?F) Capacitance Conductive Polymer Aluminum Solid Capacitor List Price {QUOTE}	APXA160ARA331MJC0G NPCAP?-PXA Series 330 Microfarad (?F) Capacitance Conductive Polymer Aluminum Solid Capacitor List Price {QUOTE}
Manufacturer Stock	N/A {0}	N/A {0}
Description	N/A Surface Mount Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte Suitable for DC-DC converters, voltage regulators and decoupling applications used on computer motherboards etc. Solvent resistant type Halogen Free
Brands	N/A Nippon Chemi-Con
Manufacturer	N/A United Chemi-Con
Series	N/A NPCAP™-PXA
Temperature Range	N/A -55 to +105 ºC
Working Direct Current (DC) Voltage	N/A 16 V
Capacitance	N/A 180 µF	N/A 330 µF
Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature	N/A 20 %
Diameter (D)	N/A 8 mm	N/A 10 mm
Dimension L	N/A 12 mm	N/A 12.5 mm
Dimension A	N/A 8.3 mm	N/A 10.3 mm
Dimension B	N/A 8.3 mm	N/A 10.3 mm
Dimension C	N/A 9 mm	N/A 11 mm
Dimension W	N/A 0.7 to 1.1 mm
Dimension P	N/A 3.1 mm	N/A 4.5 mm
Maximum Equivalent Series Resistance (ESR) at 100 to 300 Kilohertz (kHz) Frequency, 20 Degree Celsius (ºC) Temperature	N/A 16 mΩ	N/A 14 mΩ
Rated Ripple Current at 105 Degree Celsius (ºC) Temperature, 100 Kilohertz (kHz) Frequency	N/A 4360 mArms	N/A 5050 mArms
Maximum Leakage Current at 20 Degree Celsius (ºC) Temperature After 2 Minutes¹	N/A 576 µA	N/A 1050 µA
Maximum Dissipation Factor (Tan δ) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature	N/A 0.12
Maximum Impedance Ratio Low Temperature Characteristics at 100 Kilohertz (kHz) Frequency	N/A Z(-25 ºC)/Z(+20 ºC) ≤1.15 Z(-55 ºC)/Z(+20 ºC) ≤1.25
Failure Rate	N/A 0.5% per 1,000 hours maximum (Confidence level 60% at 105 ºC)
Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency	N/A 0.05
Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency	N/A 0.30
Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency	N/A 0.55
Rated Ripple Current Multipliers at 50 Kilohertz (kHz) Frequency	N/A 0.70
Rated Ripple Current Multipliers at 100 to 500 Kilohertz (kHz) Frequency	N/A 1
Industry Standards	N/A Restriction of Hazardous Substances (RoHS) Compliant
Endurance	N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after the rated voltage is applied for 15,000 hours (F45 : 3,000 hours) at 105 ºC. Appearance: No significant damage Capacitance change: ≤ ±20% of the initial value D.F. (tan δ): ≤ 150% of the initial specified value ESR: ≤ 150% of the initial specified value Leakage current: ≤ The initial specified value
Bias Humidity Test	N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjecting them to DC voltage at 60 ºC, 90 to 95% RH for 1,000 hours. Appearance: No significant damage Capacitance change: ≤ ±20% of the initial D.F. (tan δ): ≤ 150% of the initial specified value ESR: ≤ 150% of the initial specified value Leakage current: ≤ The initial specified value
Direct Current Surge Voltage (SVDC)	N/A 18 V
Surge Voltage Test	N/A The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 ºC for 30 seconds through a protective resistor (R=1 kΩ) and discharge for 5 minutes 30 seconds. Appearance: No significant damage Capacitance change: ≤ ±20% of the initial value D.F. (tan δ): ≤ 150% of the initial specified value ESR: ≤ 150% of the initial specified value Leakage current: ≤ the initial specified value
Note	N/A Product specifications are subject to change without notice. Request our product specifications before purchase and/or use. Please use our products based on the information product specifications.
¹ If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105 ºC.