PUI - Projections Unlimited, Inc. - Alchip™-MVA Series Surface Mount Aluminum Electrolytic Capacitors

Unit of Measure

Items	EMVA160ADA101MF55G Alchip?-MVA Series 100 Microfarad (?F) Capacitance and 6.3 Millimeter (mm) Dimension D Surface Mount Aluminum Electrolytic Capacitor List Price {QUOTE}	EMVA250ADA100MD55G Alchip?-MVA Series 10 Microfarad (?F) Capacitance and 4 Millimeter (mm) Dimension D Surface Mount Aluminum Electrolytic Capacitor List Price {QUOTE}	EMVA250ADA101MF80G Alchip?-MVA Series 100 Microfarad (?F) Capacitance and 6.3 Millimeter (mm) Dimension D Surface Mount Aluminum Electrolytic Capacitor List Price {QUOTE}	EMVA250ADA470MF55G Alchip?-MVA Series 47 Microfarad (?F) Capacitance and 6.3 Millimeter (mm) Dimension D Surface Mount Aluminum Electrolytic Capacitor List Price {QUOTE}	EMVA350ADA101MF80G Alchip?-MVA Series 100 Microfarad (?F) Capacitance and 6.3 Millimeter (mm) Dimension D Surface Mount Aluminum Electrolytic Capacitor List Price {QUOTE}
Manufacturer Stock	N/A {0}	N/A {0}	N/A {0}	N/A {0}	N/A {0}
Description	N/A Standard ?4 through ?18 case sizes are fully lined up Suitable to fit for downsized equipment Solvent resistant type except 100 to 450 V_dc
Brands	N/A Nippon Chemi-Con
Manufacturer	N/A United Chemi-Con
Series	N/A Alchip™-MVA
Working Direct Current (DC) Voltage	N/A 16 V	N/A 25 V	N/A 25 V	N/A 25 V	N/A 35 V
Capacitance	N/A 100 µF	N/A 10 µF	N/A 100 µF	N/A 47 µF	N/A 100 µF
Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature	N/A 20 %
Dissipation Factor (Tan δ)	N/A 0.26	N/A 0.16	N/A 0.16	N/A 0.16	N/A 0.14
Rated Ripple Current at +85 Degree Celsius (ºC) Temperature, 120 Hertz (Hz) Frequency	N/A 70 mArms	N/A 24 mArms	N/A 120 mArms	N/A 60 mArms	N/A 120 mArms
Temperature Range	N/A -40 to +85 ºC
Leakage Current at 20 Degree Celsius (ºC) Temperature After 2 Minutes	N/A I=0.01CV or 3 µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
Leakage Current at 20 Degree Celsius (ºC) Temperature After 1 Minute	N/A
Maximum Impedance Ratio Low Temperature Characteristics at 120 Hertz (Hz) Frequency	N/A Z(-25 ºC)/Z(+20 ºC) = 3 Z(-40 ºC)/Z(+20 ºC) = 6	N/A Z(-25 ºC)/Z(+20 ºC) = 3 Z(-40 ºC)/Z(+20 ºC) = 4	N/A Z(-25 ºC)/Z(+20 ºC) = 3 Z(-40 ºC)/Z(+20 ºC) = 4	N/A Z(-25 ºC)/Z(+20 ºC) = 3 Z(-40 ºC)/Z(+20 ºC) = 4	N/A Z(-25 ºC)/Z(+20 ºC) = 3 Z(-40 ºC)/Z(+20 ºC) = 3
Dimension D	N/A 6.3 mm	N/A 4 mm	N/A 6.3 mm	N/A 6.3 mm	N/A 6.3 mm
Dimension L	N/A 5.2 mm	N/A 5.2 mm	N/A 7.7 mm	N/A 5.2 mm	N/A 7.7 mm
Dimension L Tolerance (±)	N/A 0.5 mm
Dimension A	N/A 6.6 mm	N/A 4.3 mm	N/A 6.6 mm	N/A 6.6 mm	N/A 6.6 mm
Dimension B	N/A 6.6 mm	N/A 4.3 mm	N/A 6.6 mm	N/A 6.6 mm	N/A 6.6 mm
Dimension C	N/A 7.2 mm	N/A 5.1 mm	N/A 7.2 mm	N/A 7.2 mm	N/A 7.2 mm
Dimension W	N/A 0.5 to 0.8 mm
Dimension P	N/A 1.9 mm	N/A 1 mm	N/A 1.9 mm	N/A 1.9 mm	N/A 1.9 mm
Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency	N/A 1
Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency	N/A 1.05	N/A 1.30	N/A 1.05	N/A 1.05	N/A 1.05
Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency	N/A 1.08	N/A 1.40	N/A 1.08	N/A 1.08	N/A 1.08
Rated Ripple Current Multipliers at 100 Kilohertz (kHz) Frequency	N/A 1.08	N/A 1.50	N/A 1.08	N/A 1.08	N/A 1.08
Note for Rated Ripple Current Multipliers	N/A The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 ºC rise. When long life performance is required in actual use, the rms ripple current has to be reduced.
Mounting Style	N/A Surface Mount
Industry Standards	N/A Restriction of Hazardous Substances (RoHS) 2 Compliant
Endurance	N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after the rated voltage is applied for 2,000 hours at 85 ºC. Capacitance change: ≤ ±20% of the initial value D.F. (tan δ): ≤ 200% of the initial value Leakage current: ≤ The initial specified value
Shelf Life	N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after exposing them for 1,000 hours at 85 ºC without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change: ≤ ±20% of the initial value D.F. (tan δ): ≤ 200% of the initial value Leakage current: ≤ The initial specified value
Note	N/A Product specifications are subject to change without notice. Request our product specifications before purchase and/or use. Please use our products based on the information contained in product specifications.