Unit of Measure

Specifications

Available

Manufacturer Stock

Brands

APEM

Manufacturer

APEM

Series

DM

Dimension A

3.48 mm0.137 in

Dimension A Tolerance (±)

0.008 mm

Electrical Specifications

Electrical Life

2000 cycles minimum per switch at 24 VDC, 25 mA

Non-Switching Contact Rating Current at 50 Direct Current Voltage (VDC)

100 mA

Contact Rating Switching Current at 24 Volts (V) Direct Current (DC) Voltage

25 mA

Maximum Initial Contact Resistance at 100 Milliampere (mA) Current

50 mΩ

After Life Test Maximum Contact Resistance at 100 Milliampere (mA) Current

100 mΩ

Minimum Insulation Resistance at 500 Volt (V) Direct Current (DC) Voltage

100 MΩ

Dielectric Strength Alternating Current (AC) Voltage Per 1 Minute (min)

500 V
Capacitance1 5 pF

Mechanical and Thermal Specifications

Mechanical Life

2000 cycles minimum per switch

Maximum Operating Force

1000 g

Vibration

10 to 55 Hz. per MIL-STD-202F METHOD 201A

Shock

50 G (peak value) for 11 msec. per MIL-STD-202F, METHOD 213B

Operating Temperature Range

-20 to 85 ºC

Soldering and Cleaning Recommendations

Maximum Hand Soldering Temperature for 2 Seconds (s)2 350 ºC

Maximum Wave Soldering Temperature for 5 Seconds (s)

260 ºC

Cleaning with Tape Seal

Spray wash from top side only

Materials

Base Material

DM: UL94V-0, Glass Fiber Filled PPS, Black NDI: UL94V-0, Glass Fiber Filled PBT, Black

Cover Material

DM: UL94V-0, Glass Fiber Filled PPS, Black NDI: UL94V-0, Glass Fiber Filled PBT, Black

Actuator Material

UL94V-O, Nylon, White

Contact Material

Gold over Nickel Plated Copper Alloy

Terminals Material

Gold Plated Brass

Terminal Seal Material

Molded-in

Tape Seal Material

Kapton

Packaging

Packaging

DIP switches are shipped in standard IC tubes with all actuators in the "OFF" position.
Tape & reel packaging per EIA available for DMR models.

Features

Features

  • High reliability.
  • Self-cleaning contacts.
  • Multi- positions.
  • Process compatible with tape seal.
  • Dual in-line 0.100" x 0.300" term. spacing.

Note

Note

Specifications Subject to Change Without Notice.

keep switches in "OFF" position during soldering and cleaning for best results
  • 1 Maximum between adjacent terminals
  • 2 30 watt iron max.