The SHD connector is compact with a mounting height of 6.3 mm for top entry type and 5.5 mm for side entry type, and a width of 5.0 mm for top entry type and 5.1 mm for side entry type.
Unit of Measure

Specifications

Available

Manufacturer Stock

Brands

 JST

Manufacturer

 JST

Series

 SHD

Pitch Size

 1.0 mm

Mounting Type

 Crimp

Industry Standards

 Canadian Standards Association (CSA®) Certified LR20812 Restriction of Hazardous Substances (RoHS) Underwriters Laboratories (UL) Recognized E60389

Circuits

 20

Quantity Per Box

 1250
Alternating Current (AC) Rating1 1 A
Direct Current (DC) Rating2 1 A

Alternating Current (AC) Voltage Rating

 50 V

Direct Current (DC) Voltage Rating

 50 V
Temperature Range3 -25 to +85 ºC

Maximum Contact Resistance After Environmental Testing

 40 mΩ

Minimum Insulation Resistance

 100 MΩ

Withstanding Alternating Current (AC) Voltage Per Minute

 500 V

Applicable Conductor Wire Size

 32 to 28 AWG

Applicable Insulation Wire Outside Diameter (OD)

 0.4 to 0.8 mm

Dimensions

Dimension A

 9.0 mm

Dimension B

 13.1 mm

Material and Finish

Header Contact Material

 Phosphor Bronze, Nickel-Undercoated, Gold-Plated

Housing Material

 Natural Ivory Polyamide (PA), UL94V-0
Solder Tab Material4 Brass, Copper-Undercoated, Tin-Plated

Features

Features
  • Compact, low profile design
  • Anti-misinsertion feature
  • Receptacles with protrusions
  • Header designed for vacuum pick and place robotics

Note

Note

 Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog.
Contact JST for details.

This product displays (LF)(SN) on a label.
  1. The products listed above are supplied on embossed-tape.
  2. Contact JST for the headers with tin-plated pins.
  3. Contact JST for the top entry type headers with suction cap.
  • 1 AWG #28
  • 2 AWG #28
  • 3 Including temperature rise in applying electrical current
  • 4 Reflow treatment