Unit of Measure

Specifications

Available

Manufacturer Stock

Brands

APEM

Manufacturer

APEM

Series

AV

Diameter

30 mm1.181 in

Light Emitting Diode (LED) Color

Green

Terminal Type

Flying Leads

Environmental Specifications

Optional Front Panel Sealing

Internet Protocol (IP) 67 According to International Electrotechnical Commission (IEC) 60529

Robustness

Impact Protection (IK) 06 according to EN 62262 (1 joule)

Operating Temperature

-30 to 85 ºC-22 to 185 ºF

Electrical Specifications

Maximum Current Rating with Resistive Load

1 A

Maximum Direct Current (DC) Voltage with Resistive Load

30 V

Light Emitting Diode (LED) Direct Current (DC) Voltage

12 V24 V48 V

Initial Contact Resistance

100 mΩ

Minimum Insulation Resistance at 500 Volt (V) Direct Current (DC) Voltage

10 MΩ

Dielectric Strength

1,000 Vrms 50 Hz Minimum Between Terminals and Frame 500 Vrms 50 Hz Minimum Between Terminals

Electrical Life at Full Load

250000 cycles

General Specifications

Travel

2.5 mm0.003 in

Travel Tolerance (±)

0.3 mm

Operating Force

5 N

Operating Force Tolerance (±)

2 N
Maximum Torque1 10 N·m

Maximum Panel Thickness

1 to 6 mm0.039 to 0.236 in

Low Level/Mechanical Life

1000000 cycles

Maximum Hand Soldering Temperature for 5 Seconds (s)

350 ºC662 ºF

Units Per Package

1

Materials

Case Material

Polyamide, Glass Filled

Contact Material

Silver

Bushing Material

Stainless Steel 316

Actuator Material

Stainless Steel 316

Elastomeric Membrane

Silicone

Distinctive Features

Distinctive Features

  • Large actuator with illuminated ring
  • Momentary NC/NO
  • Solder lug, flying lead or cable terminals
  • Marking available on request
  • Light Emitting Diode (LED)

Note

Note

The company reserves the right to change specifications without notice.
  • 1 Applied to nut