Print Back
Common Anode, Right Hand Decimal.

A Relative Humidity between 40% and 60% is recommended in ESD-protected work areas to reduce static build-up during assembly process.
Unit of Measure

Specifications

Available

N/A {0}

Manufacturer Stock

N/A {0}

Brands

N/A SunLED

Manufacturer

N/A SunLED

Lead Solder Temperature (2 Millimeter (mm) Below Package Base)

N/A 260 ºC for 3 to 5 Seconds

Emitting Color

N/A Green

Emitting Material

N/A Indium Gallium Nitride (InGaN)

Minimum Luminous Intensity at IF= 10 Milliampere (mA) Current

N/A 21000 mcd

Minimum Luminous Intensity with CIE127-2007 at IF= 10 Milliampere (mA) Current

N/A 9000 mcd

Typical Luminous Intensity at IF= 10 Milliampere (mA) Current

N/A 59990 mcd

Typical Luminous Intensity with CIE127-2007 at IF= 10 Milliampere (mA) Current

N/A 18990 mcd

Note for Luminous Intensity and Wavelength

N/A Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.

Digit Height

N/A 0.4 in

Tolerance (±)

N/A 0.25 mm0.01 in

Moisture Sensitivity Level (MSL)

N/A 2a

Units Per Package

N/A 400

Package Type

N/A Reel

Industry Standards

N/A Restriction of Hazardous Substances (RoHS) Compliant

Absolute Maximum Ratings (TA = 25 Degree Celsius (ºC) Temperature)

Reverse Voltage (VR)

N/A 5 V

Forward Current (IF)

N/A 30 mA

Forward Peak Current 1/10 Duty Cycle 0.1 Millisecond (ms) Pulse Width (iFS)

N/A 100 mA

Power Dissipation (PD)

N/A 120 mW

Operating Temperature (TA)

N/A -40 ~ +85 ºC

Storage Temperature Range (TSTG)

N/A -40 ~ +85 ºC

Electrostatic Discharge Threshold (HBM)

N/A 1000 V

Operating Characteristics (TA = 25 Degree Celsius (ºC) Temperature)

Typical Forward Voltage (VF) at IF=10 Milliampere (mA) Current

N/A 3.05 V

Maximum Forward Voltage (VF) at IF=10 Milliampere (mA) Current

N/A 4 V

Maximum Reverse Current (IR) at VR=5 Volt (V) Voltage

N/A 10 µA

Typical Wavelength of Peak Emission with CIE127-2007 (λP) at IF=10 Milliampere (mA) Current

N/A 520 nm

Typical Wavelength of Dominant Emission with CIE127-2007 (λD) at IF=10 Milliampere (mA) Current

N/A 530 nm

Typical Spectral Line Full Width at Half-Maximum (Δλ) at IF=10 Milliampere (mA) Current

N/A 35 nm

Typical Capacitance (C) at VF=0 Volt (V) Voltage, f= 1 Megahertz (MHz) Frequency

N/A 100 pF

Features

Features

N/A
  • Robust package
  • Low power consumption
  • Standard configuration: Gray face white segments
  • Lead-Free

Note

Note

N/A
  1. Specifications are subject to change without notice.
  2. The gap between the reflector and PCB shall not exceed 0.25 mm.