Projections Unlimited, Inc
PUI | Global Corporate HQ
15311 Barranca Parkway
Irvine , CA , 92618
United States
Phone:(714) 544-2700
Email: sales@gopui.com
Print Back
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A American Zettler®

Manufacturer

 N/A American Zettler�

Contacts

Arrangement

 N/A Single Pole Double Throw (SPDT) (1 Form C) Single Pole Single Throw (SPST) (1 Form A, 1 Form B)

Maximum Switched Power Resistive Load Rating

 N/A 480 W4432 V·A

Maximum Switched Current Resistive Load Rating

 N/A 16 A
Maximum Switched Direct Current (DC) Voltage Resistive Load Rating1 N/A 150 V

Maximum Switched Alternating Current (AC) Voltage Resistive Load Rating

 N/A 440 V

Rated Load Current (Underwriter Laboratories (UL))

 N/A 16 A at 277 VAC resistive, 50 k cycles [Silver cadmium oxide]
16 A at 277 VAC resistive, 100 k cycles [Silver nickel]
1 HP at 250 VAC [Silver cadmium oxide]
1 HP at 277 VAC, 40ºC (1 Form A) [Silver cadmium oxide]
1/2 HP at 125 VAC [Silver cadmium oxide]
TV-5 at 125 VAC [Silver cadmium oxide]
16 A at 277 VAC resistive, 75 k cycles [Silver tin oxide]
B300 Pilot Duty [Silver tin oxide]
R300 Pilot Duty [Silver tin oxide]

Rated Load Current (Verband Deutscher Elektrotechniker (VDE))

 N/A 16 A at 250 VAC resistive [Silver cadmium oxide] and [Silver tin oxide] Contact factory for additional VDE ratings

Material

 N/A Silver cadmium oxide or silver tin oxide or silver nickel. Gold plating available
Initially Resistance2 N/A < 50 mΩ

General Data

Mechanical Life Expectancy (Minimum Operations)

 N/A 1 x 107

Electrical Life Expectancy (Minimum Operations)

 N/A 1 x 105 at 16 Ampere (A) and 240 Alternating Current (AC) Voltage Respectively

Operate Time (Typical)

 N/A 7 Millisecond (ms) at Nominal Coil Voltage

Release Time (Typical)

 N/A 3 Millisecond (ms) at Nominal Coil Voltage (with no Coil Suppression)

Dielectric Strength at Sea Level for 1 Minute (min)

 N/A 1000 Root Mean Square (RMS) Voltage (VRMS) Between Open Contacts 5000 Root Mean Square (RMS) Voltage (VRMS) Coil to Contact

Insulation Resistance

 N/A 1000 Megaohm (MΩ) at Degree Celsius (ºC) 500 Direct Current (DC) Voltage 50 Percent (%) RH

Dropout

 N/A Greater than 10 Percent (%) of Nominal Coil Voltage (DC) Greater than 15 Percent (%) of Nominal Coil Voltage (AC)

Operating Ambient Temperature at Nominal Coil Voltage

 N/A -40 to 100 ºC-40 to 212 ºF

Storage Ambient Temperature at Nominal Coil Voltage

 N/A -40 to 130 ºC-40 to 266 ºF

Vibration at 10 to 55 Hertz (Hz)

 N/A 0.062 in. DA

Shock

 N/A 10 g

Enclosure

 N/A Polybutylene Terephthalate (PBT) Polyester

Terminals

 N/A Tinned Copper Alloy Polycarbonate (PC)

Maximum Solder Temperature

 N/A 270 ºC518 ºF

Maximum Solder Time

 N/A 5 seconds

Maximum Solvent Temperature

 N/A 80 ºC176 ºF

Maximum Immersion Time

 N/A 30 seconds

Approximate Weight

 N/A 14 g

Coil Specification

Power at Pickup Direct Current (DC) Voltage (Typical)

 N/A 196 mW

Power at Pickup Alternating Current (AC) Voltage (Typical)

 N/A 0.43 V·A
Maximum Continuous Power Dissipation3 N/A 1.7 W
Temperature Rise4 N/A 26 ºC47 ºF

Nominal Coil Direct Current (DC) Voltage

 N/A 6 V

Must Operate Direct Current (DC) Voltage

 N/A 4.2 V

Maximum Continuous Direct Current (DC) Voltage

 N/A 12.3 V

Coil Resistance (±) 10 Percent (%)

 N/A 90

Features

Features

 N/A
  • Dielectric strength 5000 VRMS
  • Low cost
  • Epoxy sealed versions available
  • AC and DC coils
  • 16 Amp switching
  • High inrush version available (80 A)
  • Class B (130 ºC) standard
  • Class F (155 ºC) versions available
  • Isolation spacing greater than 10 mm
  • UL, CUR file E44211, VDE 40006031

Note

Note

 N/A
  1. All values at 20ºC (68ºF).
  2. Relay may pull in with less than “Must Operate” value.
  3. Specifications subject to change without notice.
  • 1 If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory
  • 2 Using 6 V 1 A method
  • 3 At 20 ºC (68 ºF) Ambient
  • 4 At Nominal Coil Voltage