Print Back
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20 %.
Unit of Measure

Specifications

Available

N/A {0}

Manufacturer Stock

N/A {0}

Brands

N/A Diodes Incorporated®

Manufacturer

N/A Diodes Incorporated�

Approximate SMB Weight

N/A 0.093 g

Approximate SMC Weight

N/A 0.21 g

Industry Standards

N/A Flammability: Underwriters Laboratories (UL) 94V-0 Restriction of Hazardous Substances (RoHS) Compliant

Mechanical Data

Case

N/A SMB/SMC

Case Material

N/A Molded Plastic

Moisture Sensitivity

N/A Level 1 per J-STD-020

Polarity

N/A Cathode Band Cathode Notch

Leads

N/A Lead Free Plating (Matte Tin Finish). Solderable per MIL-STD-202, Method 208

Maximum Ratings (at TA= +25 Degree Celsius (ºC) Unless Otherwise Specified)

Peak Repetitive Reverse Voltage (VRRM)

N/A 200 V

Working Peak Reverse Voltage (VRWM)

N/A 200 V
Direct Current (DC) Blocking Voltage (VR)1 N/A 200 V

Root Mean Square (RMS) Reverse Voltage (VR(RMS))

N/A 140 V

Average Rectified Output Current (IO) at TT = 110 Degree Celsius (ºC) Temperature

N/A 3 A

Non-Repetitive Peak Forward Surge Current (IFSM) 8.3 Millisecond (ms) Single Half Sine-Wave Superimposed on Rated Load

N/A 100 A

Thermal Characteristics

Typical Thermal Resistance Junction to Terminal (RθJT

N/A 10 ºC/W
Typical Thermal Resistance Junction to Ambient (RθJA2 N/A 50 ºC/W

Operating and Storage Temperature Range (TJ, TSTG)

N/A -55 to +150 ºC

Electrical Characteristics (Tamb = 25 Degree Celsius (ºC), Unless Otherwise Specified)

Maximum Forward Voltage (VFM) at IF = 3.0 Ampere (A)

N/A 0.9 V
Peak Reverse Current at Rated DC Blocking Voltage (IRM) at TA = 25 Degree Celsius (ºC) Temperature3 N/A 10 µA

Peak Reverse Current at Rated DC Blocking Voltage (IRM) at TA = 125 Degree Celsius (ºC) Temperature

N/A 500 µA
Maximum Reverse Recovery Time (Trr)4 N/A 25 ns
Typical Total Capacitance (CT)5 N/A 45 pF

Features

Features

N/A
  • Glass Passivated Die Construction
  • Super-Fast Recovery Time for High Efficiency
  • Surge Overload Rating to 100 A Peak
  • Ideally Suited for Automated Assembly
  • Lead-Free Finish; RoHS Compliant:
    EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied.
  • Halogen and Antimony Free. "Green" Device:
    Halogen- and Antimony-free "Green" products are defined as those which contain < 900 ppm bromine, < 900 ppm chlorine (< 1500 ppm total Br + Cl) and < 1000 ppm antimony compounds.
  • 1 Short duration pulse test used to minimize self-heating effect.
  • 2 Unit mounted on PC board with 5.0 mm2 (0.013 mm thick) copper pads as heat sink.
  • 3 Short duration pulse test used to minimize self-heating effect.
  • 4 Measured with IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A.
  • 5 Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC.