Print Back
Unit of Measure

Specifications

Available

Manufacturer Stock

Brands

APEM

Manufacturer

APEM

Series

IP

Bushing Diameter

12 mm

Actuator Color

Dark Blue

Actuator Shapes

Curved Round

Light Emitting Diode (LED) Colors

Blue

Terminals

Solder Lugs

Contacts

Silver, gold plated (standard)

Environmental Specifications

Front Panel Sealing

Ingress Protection (IP65) and Ingress Protection (IP) 67 According to International Electrotechnical Commission (IEC) 60529
Shock Resistance1 100 g

Vibration Resistance

10-500 Hz - 10 g according to International Electrotechnical Commission (IEC) 512-4, test 6d

Salt Spray

International Electrotechnical Commission (IEC) 512-6, Test 11f

Robustness (Non-Illuminated)

Impact Protection (IK) 06 according to EN 62262 (1 joule)

Operating Temperature

-40 to 85 ºC-40 to 185 ºF

Electrical Specifications

Maximum Current Voltage Rating with Resistive Load2 1 A 48 VDC, 200,000 cycles 1 A 72 VDC, 15,000 cycles 2 A 48 VDC, 100,000 cycles 3 A 48 VDC, 75,000 cycles 4 A 12 VDC, 200,000 cycles

Initial Contact Resistance

100 mΩ

Dielectric Strength

1500 Vrms between terminals
1000 Vrms between terminals and frame

Minimum Insulation Resistance at 500 Volt (V) Direct Current (DC) Voltage

1 GΩ

General Specifications

Minimum Panel Thickness

1.5 mm0.059 in

Maximum Panel Thickness

5.5 mm0.217 in

Total Travel

2.5 mm0.98 in

Total Travel Tolerance (±)

0.3 mm

Typical Operating Force

10 N

Low Level/Mechanical Life

200000 cycles
Torque3 1.5 N·m
Soldering Temperature4 320 ºC608 ºF

Materials

Case Material

Thermoplastic UL94-V0

Actuator Material

Polyamide 6/6

Bushing Material

Black Painted Zinc Die-Cast (Zamak)

Contact Material

Gold Plated Silver

Output Wires (Flying Lead Terminals) Material

F version : American Wire Gauge (AWG) 20, section 0.6 mm² W version : American Wire Gauge (AWG) 24, section 0.23 mm²

Light Emitting Diode (LED) Wire Material

F version : American Wire Gauge (AWG) 26, section 0.12 mm² W version : American Wire Gauge (AWG) 24, section 0.23 mm²

Lens Material

Polycarbonate

Terminal Seal Material

Epoxy

Distinctive Features

Distinctive Features

  • Latching action
  • Illuminated or non-illuminated
  • Compact
  • Flat round actuator for optional marking
  • Sealed to IP67

Agency Approvals

Agency Approvals

Recognized Component Mark (RU®) 2 A 125 VAC/250 VAC Recognized Component Mark (RU®) File E83438

Note

Note

APEM products may be recycled at end-of-life for the re-claiming of valuable metal components.

  • 1 According to IEC 512-4, test 6c
  • 2 For W terminals, current has to be limited to 400 mA.
  • 3 Maximum applied to nut
  • 4 Maximum for 3 sec