Print Back
Unit of Measure

Specifications

Available

N/A {0}

Manufacturer Stock

N/A {0}

Brands

N/A APEM

Manufacturer

N/A APEM

Series

N/A IP

Bushing Diameter

N/A 12 mm

Actuator Color

N/A Dark Blue

Actuator Shapes

N/A Curved Round

Light Emitting Diode (LED) Colors

N/A Blue

Terminals

N/A Solder Lugs

Contacts

N/A Silver, gold plated (standard)

Environmental Specifications

Front Panel Sealing

N/A Ingress Protection (IP65) and Ingress Protection (IP) 67 According to International Electrotechnical Commission (IEC) 60529
Shock Resistance1 N/A 100 g

Vibration Resistance

N/A 10-500 Hz - 10 g according to International Electrotechnical Commission (IEC) 512-4, test 6d

Salt Spray

N/A International Electrotechnical Commission (IEC) 512-6, Test 11f

Robustness (Non-Illuminated)

N/A Impact Protection (IK) 06 according to EN 62262 (1 joule)

Operating Temperature

N/A -40 to 85 ºC-40 to 185 ºF

Electrical Specifications

Maximum Current Voltage Rating with Resistive Load2 N/A 1 A 48 VDC, 200,000 cycles 1 A 72 VDC, 15,000 cycles 2 A 48 VDC, 100,000 cycles 3 A 48 VDC, 75,000 cycles 4 A 12 VDC, 200,000 cycles

Initial Contact Resistance

N/A 100 mΩ

Dielectric Strength

N/A 1500 Vrms between terminals
1000 Vrms between terminals and frame

Minimum Insulation Resistance at 500 Volt (V) Direct Current (DC) Voltage

N/A 1 GΩ

General Specifications

Minimum Panel Thickness

N/A 1.5 mm0.059 in

Maximum Panel Thickness

N/A 5.5 mm0.217 in

Total Travel

N/A 2.5 mm0.98 in

Total Travel Tolerance (±)

N/A 0.3 mm

Typical Operating Force

N/A 10 N

Low Level/Mechanical Life

N/A 200000 cycles
Torque3 N/A 1.5 N·m
Soldering Temperature4 N/A 320 ºC608 ºF

Materials

Case Material

N/A Thermoplastic UL94-V0

Actuator Material

N/A Polyamide 6/6

Bushing Material

N/A Black Painted Zinc Die-Cast (Zamak)

Contact Material

N/A Gold Plated Silver

Output Wires (Flying Lead Terminals) Material

N/A F version : American Wire Gauge (AWG) 20, section 0.6 mm² W version : American Wire Gauge (AWG) 24, section 0.23 mm²

Light Emitting Diode (LED) Wire Material

N/A F version : American Wire Gauge (AWG) 26, section 0.12 mm² W version : American Wire Gauge (AWG) 24, section 0.23 mm²

Lens Material

N/A Polycarbonate

Terminal Seal Material

N/A Epoxy

Distinctive Features

Distinctive Features

N/A
  • Latching action
  • Illuminated or non-illuminated
  • Compact
  • Flat round actuator for optional marking
  • Sealed to IP67

Agency Approvals

Agency Approvals

N/A Recognized Component Mark (RU®) 2 A 125 VAC/250 VAC Recognized Component Mark (RU®) File E83438

Note

Note

N/A APEM products may be recycled at end-of-life for the re-claiming of valuable metal components.

  • 1 According to IEC 512-4, test 6c
  • 2 For W terminals, current has to be limited to 400 mA.
  • 3 Maximum applied to nut
  • 4 Maximum for 3 sec