Print Back
  • 32 mm diameter speaker with Neodymium magnet for 82 dB sensitivity
  • 0.1 W continuous, 0.2 W maximum power handling and 8 ? impedance
  • Mylar? cone for wide frequency response
  • Thru-hole design and wave solderable for PCB mount
Unit of Measure

Specifications

Available

N/A {0}

Manufacturer Stock

N/A {0}

Brands

N/A PUI Audio™

Manufacturer

N/A PUI Audio�, Inc.

Rated Input Power

N/A 0.1 W

Maximum Input Power

N/A 0.2 W

Impedance

N/A 8 Ω

Impedance Tolerance (±)

N/A 20 %

Sound Pressure Level (SPL) Output

N/A 82 dBA

Sound Pressure Level (SPL) Output Tolerance (±)

N/A 3 dBA

Testing Condition for Sound Pressure Level (SPL) Output

N/A Sound Pressure Level (SPL) at 0.1 W/0.5 M (At 1.2, 1.5, 1.6, 1.8 kHz)

Maximum Distortion

N/A 5 %

Resonant Frequency

N/A 1500 Hz

Resonant Frequency Tolerance (±)

N/A 20 %

Frequency Range

N/A 500 ~ 20000 Hz

Housing Material

N/A Noryl®

Cone Material

N/A Mylar®

Magnet Material

N/A Neodymium (NdFeB)

Operating Temperature

N/A -20 ~ +60 ºC

Diameter

N/A 31.9 mm

Tolerance (±)

N/A 0.5 mm

Angle Tolerance (±)

N/A 3 º

Weight

N/A 10 g

Industry Standards

N/A Conflict-Free Sourcing Initiative (CFSI) Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) Restriction of Hazardous Substances (RoHS) 2002/95/EC

Mechanical and Environment Testing

High Temperature Test

N/A 55 ºC with random humidity for 96 hours

Low Temperature Test

N/A -20 ºC with random humidity for 96 hours

Humidity Test

N/A 40 ºC with 90% to 95% relative humidity for 96 hours

Vibration Test

N/A 1.5 mm movement modulated at 10-55 Hz for 2 hours

Drop Test

N/A 75 cm free fall onto 40 mm thick board, 10 cycles

Temperature Cycle Test

N/A -20 ºC to 55 ºC, 5 cycles

Note for Mechanical and Environment Testing

N/A After tests, speaker shall rest for 1 hours. SPL shall not deviate ±3 dB from pre-test measurement.

Note

Note

N/A
  1. Specification subject to change or withdrawal without notice.
  2. Hand solder only.