Print Back
Vertical Surface Mount
Unit of Measure

Specifications

Available

N/A {0}

Manufacturer Stock

N/A {0}

Brands

N/A Mill-Max®

Manufacturer

N/A Mill-Max�

Pin Head Diameter

N/A 0.030 in0.762 mm

Type

N/A Spring-Loaded

Category

N/A Single-Level Cell (SLC) Pin Header Strip

Mounting Style

N/A Surface Mount

Number of Pins

N/A 28

Pitch Size

N/A 0.100 in2.540 mm

Rows

N/A Double Row

Product Lifecycle

N/A Active

Environmental Specifications

Temperature Range1 N/A -55/+125 ºC
Shock2 N/A No Elect. Discontinuity > 1 µs at 50 g
Vibration3 N/A No Elect. Discontinuity > 1 µs at 10 to 20000 Hz, 20 G
Restriction of Hazardous Substances (RoHS)4 N/A true

Mechanical Specifications

Durability at Mid-Stroke

N/A Up to 1000000 cycles

Materials

Loose Pin/Receptacle # Material

N/A 7007 (Brass Alloy)

Shell Plating

N/A 20 µin Gold over Nickel

Inner Plating

N/A (Spring) 10 µin Gold

Insulator Material

N/A Nylon 4/6

Technical Specifications

Initial Height

N/A 0.295 in7.493 mm

Stroke

N/A 0.055 in1.397 mm

Dimension A

N/A 0.295 in7.493 mm

Electrical Specifications

Root Mean Square (RMS) Rated Voltage

N/A 100 V

Direct Current (DC) Rated Voltage

N/A 150 V

Minimum Insulation Resistance

N/A 10000 MΩ

Minimum Root Mean Square (RMS) Dielectric Withstanding Voltage (VRMS)

N/A 1000 V

Standard Tolerances

Assembly Tolerance (±)

N/A 0.010 in0.25 mm

Insulator Width Tolerance (±)

N/A 0.005 in0.13 mm

Insulator Height Tolerance (±)

N/A 0.005 in0.13 mm

Coplanarity of Surface Mount Type (SMT) Connectors in Connector Length

N/A 0.005 to 1 in0.13 to 25.4 mm

Insulator Flatness in Connector Length

N/A 0.005 to 1 in0.13 to 25.4 mm

Pin Length Tolerance (±)

N/A 0.006 in0.15 mm

Pin Diameter Tolerance (±)

N/A 0.002 in0.051 mm

Pin Angle Tolerance (±)

N/A 2 º

Additional Notes and Specifications

Additional Notes and Specifications

N/A In the interest of improved design, quality and performance, Mill-Max® reserves the right to make changes in its specifications without prior notice. Specifications and tolerances are provided wherever possible. The tolerance on dimensions of critical to function features is typically held tighter than the stated standard tolerances, such as press-fits, holes and lengths affecting the coplanarity of SMT products. Due to the wide variety of interconnects Mill-Max® offers, the specific tolerances vary from product to product. If you need information regarding the tolerance of a particular part, please contact Technical Services.
  • 1 Per IEC 60512-11-(4,-9,-10,-12)
  • 2 For discrete pin only. Per IEC 60512-6-3: Test 6c: Shock
  • 3 For discrete pin only. Per IEC 60512-6-3: Test 6c: Shock
  • 4 Mill-Max® products labeled with the RoHS symbol are compliant with all three RoHS Directives. All of our products previously described as RoHS (2002/95/EC) and RoHS-2 (2011/65/EC) are also compliant with RoHS-3 (2015/863/EU).