Print Back
  • 6 mm overall diameter and 2.2 mm height with pin terminals
  • -42 dB sensitivity for use in most environments
  • Wide 2 to 10 VDC operating voltage and 50-16000 Hz frequency range
  • >60 dB signal to noise ratio and 2.2 kOhm impedance
  • Omni-directional polar pattern for great off-axis response
  • Internal 33 pF capacitors filters out GSM TDMA noise
Unit of Measure

Specifications

Available

N/A {0}

Manufacturer Stock

N/A {0}

Brands

N/A PUI Audio™

Manufacturer

N/A PUI Audio� Inc.

Directivity

N/A Omni-Directional

Sensitivity

N/A -42 dB

Sensitivity Tolerance (±)

N/A 3 dB

Direct Current (DC) Standard Operating Voltage

N/A 2 V

Maximum Direct Current (DC) Operating Voltage

N/A 10 V

Maximum Current Consumption

N/A 0.5 mA

Impedance

N/A 2.2 kΩ

Minimum Signal to Noise Ratio

N/A 60 dB

Terminals

N/A Pin

Internal Capacitor

N/A 33 pF

Tolerance (±)

N/A 0.5 mm

Angle Tolerance (±)

N/A 3 º

Industry Standards

N/A Conflict-Free Sourcing Initiative (CFSI) Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) Restriction of Hazardous Substances (RoHS) 2002/95/EC

Reliability Testing

High Temperature Test

N/A 70°C with random humidity for 200 hours

Low Temperature Test

N/A -40°C with random humidity for 200 hours

Humidity Test

N/A 40°C with 90% relative humidity for 200 hours

Vibration Test

N/A 3 mm movement for 3 minutes in each of 3 axis

Drop Test

N/A 70 cm free fall onto 20 mm thick board, two directions

Temperature Cycle Test

N/A -10°C to 50°C, 5 cycles

Note

Note

N/A
  1. Specifications subject to change or withdrawal without notice.
  2. Microphone cloth over face is IP51 rated.