Projections Unlimited, Inc
PUI | Global Corporate HQ
15311 Barranca Parkway
Irvine , CA , 92618
United States
Phone:(714) 544-2700
Email: sales@gopui.com
Print Back
Wire-to-board (Crimp style/IDC) / Wire-to-wire (Crimp style/IDC)

Based upon wire-to-board crimp style PA connectors, the PA series family of connector have been expanded to meet the requirement of complex wire harness of 2.0 mm pitch connectors with secure locking mechanism thanks to the additional line up of wire-to-board IDC style PAF connectors and wire-to-wire crimp style PAL connectors.
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A JST

Manufacturer

 N/A JST

Series

 N/A PA

Pitch Size

 N/A 2.0 mm0.079 in

Mounting Type

 N/A Retainer Mountable Type Crimp

Industry Standards

 N/A Canadian Standards Association (CSA®) Certified LR20812 Restriction of Hazardous Substances (RoHS) Underwriters Laboratories (UL) Recognized E60389

Circuits

 N/A 10

Quantity Per Reel

 N/A 1000
Alternating Current (AC) Rating1 N/A 3 A
Direct Current (DC) Rating2 N/A 3 A

Alternating Current (AC) Voltage Rating

 N/A 100 V

Direct Current (DC) Voltage Rating

 N/A 100 V
Temperature Range3 N/A -25 to +85 ºC

Maximum Contact Resistance After Environmental Testing

 N/A 25 mΩ

Minimum Initial Insulation Resistance

 N/A 1000 MΩ

Withstanding Alternating Current (AC) Voltage Per Minute

 N/A 800 V

Applicable Wire Size

 N/A 28 to 22 AWG

Dimensions

Dimension A

 N/A 18.0 mm0.709 in

Dimension B

 N/A 24.0 mm0.945 in

Material and Finish

Post Material

 N/A Brass, Copper-Undercoated, Tin-Plated

Wafer Material

 N/A Natural Ivory Polyamide Resin, UL94V-0

Solder Tab Material

 N/A Brass, Copper-Undercoated, Tin-Plated

Features

Features

 N/A
  • Secure locking device
    The housing has a locking device to prevent accidental disconnection because of routing of wires or of vibration, and also reverse and different circuit numbers mating.
  • Interchangeable between crimp and IDC socket
    Both crimp and IDC sockets use the same headers and wire-to-wire mating halves.
  • Secondary retainers
    Secondary retainers enhance safety in case of partial insertion or accidental release of the contact.
  • Harness variation
    PAL, wire-to-wire crimp style connector, increases wire harness variation.
  • Highly reliable contact
    The box contact supplies stable contact performance even under conditions of vibration, distortion, low voltage or low current.
  • Insertion guide mechanism
    Header has housing insertion guides for easy and secure insertion.
  • Flanged press pin
    Top entry type header has flanged press pins, preventing accidental removal of the pins that might result from the distorted unmating especially in the case of small No. of circuits.

Note

Note

 N/A Contact JST if Lead-Free product is required.
Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog.
Contact JST for details.

TB - taping product.
TBT - taping product with suction tape.
  • 1 AWG #22
  • 2 AWG #22
  • 3 Including temperature rise in applying electrical current