Print Back
Unit of Measure

Specifications

Available

N/A {0}

Manufacturer Stock

N/A {0}

Brands

N/A PUI Audio™

Manufacturer

N/A PUI Audio�, Inc.

Direct Current (DC) Rated Voltage

N/A 5 V

Direct Current (DC) Operating Voltage Range

N/A 3 ~ 16 V

Maximum Rated Current

N/A 25 mA

Minimum Sound Pressure Level (SPL) at 10 Centimeter (cm)

N/A 98 dBA

Resonant Frequency

N/A 3000 Hz

Resonant Frequency Tolerance (±)

N/A 500 Hz

Tone

N/A Continuous

Operating Temperature

N/A -30 ~ +75 ºC

Storage Temperature

N/A -20 ~ +65 ºC

Housing Material

N/A Polybutylene Terephthalate (PBT)

Terminal Material

N/A Tin (Sn) Plated Copper

Acceptable Soldering Methods

N/A Hand Solder Wave Solder

Diameter

N/A 24 mm

Diameter Tolerance (±)

N/A 0.3 mm

Tolerance (±)

N/A 0.5 mm

Angle Tolerance (±)

N/A 3 º

Weight

N/A 5.4 g

Industry Standards

N/A Restriction of Hazardous Substances (RoHS)

Reliability Testing

High Temperature Test

N/A 96 hours at +75 ºC ± 2 ºC and allowed to rest for 2 to 4 hours.

Low Temperature Test

N/A 96 hours at -30 ºC ± 2 ºC and allowed to rest for 2 to 4 hours.

Humidity Test

N/A 96 hours at +40 ºC ± 2 ºC with relative humidity at 93% +2%/-3% and allowed to rest for 2 to 4 hours.

Vibration Test

N/A Test for the directions of X Y and Z (total 0.5 hours). To-and-fro. sweep time (from 10-55 Hz and then 55-10) under single amplitude of 1 mm is 1 minute.

Drop Test

N/A 3 times from height of 70 cm onto the surface of 10mm thick wooden board.

Temperature Cycle Test

N/A -30 ±2 ºC for 30 minutes Room temp. for 15 minutes +75 ±2 ºC for 30 minutes Room temp. for 15 minutes 5 cycles

Solder Heat Resistance Test

N/A The part leads (pins) shall be immersed in molten solder maintained at 260 ±5 ºC for 10seconds.

Note for Reliability Testing

N/A After the test part shall meet specifications, except the SPL shall be in ±10 dB.

Note

Note

N/A Specifications subject to change or withdrawal without notice.