Print Back
Unit of Measure

Specifications

Available

N/A {0}

Manufacturer Stock

N/A {0}

Brands

N/A APEM

Manufacturer

N/A APEM

Series

N/A DM

Dimension A

N/A 31.42 mm1.237 in

Dimension A Tolerance (±)

N/A 0.008 mm

Electrical Specifications

Electrical Life

N/A 2000 cycles minimum per switch at 24 VDC, 25 mA

Non-Switching Contact Rating Current at 50 Direct Current Voltage (VDC)

N/A 100 mA

Contact Rating Switching Current at 24 Volts (V) Direct Current (DC) Voltage

N/A 25 mA

Maximum Initial Contact Resistance at 100 Milliampere (mA) Current

N/A 50 mΩ

After Life Test Maximum Contact Resistance at 100 Milliampere (mA) Current

N/A 100 mΩ

Minimum Insulation Resistance at 500 Volt (V) Direct Current (DC) Voltage

N/A 100 MΩ

Dielectric Strength Alternating Current (AC) Voltage Per 1 Minute (min)

N/A 500 V
Capacitance1 N/A 5 pF

Mechanical and Thermal Specifications

Mechanical Life

N/A 2000 cycles minimum per switch

Maximum Operating Force

N/A 1000 g

Vibration

N/A 10 to 55 Hz. per MIL-STD-202F METHOD 201A

Shock

N/A 50 G (peak value) for 11 msec. per MIL-STD-202F, METHOD 213B

Operating Temperature Range

N/A -20 to 85 ºC

Soldering and Cleaning Recommendations

Maximum Hand Soldering Temperature for 2 Seconds (s)2 N/A 350 ºC

Maximum Wave Soldering Temperature for 5 Seconds (s)

N/A 260 ºC

Cleaning with Tape Seal

N/A Spray wash from top side only

Materials

Base Material

N/A DM: UL94V-0, Glass Fiber Filled PPS, Black NDI: UL94V-0, Glass Fiber Filled PBT, Black

Cover Material

N/A DM: UL94V-0, Glass Fiber Filled PPS, Black NDI: UL94V-0, Glass Fiber Filled PBT, Black

Actuator Material

N/A UL94V-O, Nylon, White

Contact Material

N/A Gold over Nickel Plated Copper Alloy

Terminals Material

N/A Gold Plated Brass

Terminal Seal Material

N/A Molded-in

Tape Seal Material

N/A Kapton

Packaging

Packaging

N/A DIP switches are shipped in standard IC tubes with all actuators in the "OFF" position.
Tape & reel packaging per EIA available for DMR models.

Features

Features

N/A
  • High reliability.
  • Self-cleaning contacts.
  • Multi- positions.
  • Process compatible with tape seal.
  • Dual in-line 0.100" x 0.300" term. spacing.

Note

Note

N/A Specifications Subject to Change Without Notice.

keep switches in "OFF" position during soldering and cleaning for best results
  • 1 Maximum between adjacent terminals
  • 2 30 watt iron max.