Projections Unlimited, Inc
PUI | Global Corporate HQ
15311 Barranca Parkway
Irvine , CA , 92618
United States
Phone:(714) 544-2700
Email: sales@gopui.com
Print Back
The SHD connector is compact with a mounting height of 6.3 mm for top entry type and 5.5 mm for side entry type, and a width of 5.0 mm for top entry type and 5.1 mm for side entry type.
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A JST

Manufacturer

 N/A JST

Series

 N/A SHD

Pitch Size

 N/A 1.0 mm

Mounting Type

 N/A Crimp

Industry Standards

 N/A Canadian Standards Association (CSA®) Certified LR20812 Restriction of Hazardous Substances (RoHS) Underwriters Laboratories (UL) Recognized E60389

Circuits

 N/A 20

Quantity Per Box

 N/A 1250
Alternating Current (AC) Rating1 N/A 1 A
Direct Current (DC) Rating2 N/A 1 A

Alternating Current (AC) Voltage Rating

 N/A 50 V

Direct Current (DC) Voltage Rating

 N/A 50 V
Temperature Range3 N/A -25 to +85 ºC

Maximum Contact Resistance After Environmental Testing

 N/A 40 mΩ

Minimum Insulation Resistance

 N/A 100 MΩ

Withstanding Alternating Current (AC) Voltage Per Minute

 N/A 500 V

Applicable Conductor Wire Size

 N/A 32 to 28 AWG

Applicable Insulation Wire Outside Diameter (OD)

 N/A 0.4 to 0.8 mm

Dimensions

Dimension A

 N/A 9.0 mm

Dimension B

 N/A 13.1 mm

Material and Finish

Header Contact Material

 N/A Phosphor Bronze, Nickel-Undercoated, Gold-Plated

Housing Material

 N/A Natural Ivory Polyamide (PA), UL94V-0
Solder Tab Material4 N/A Brass, Copper-Undercoated, Tin-Plated

Features

Features

 N/A
  • Compact, low profile design
  • Anti-misinsertion feature
  • Receptacles with protrusions
  • Header designed for vacuum pick and place robotics

Note

Note

 N/A Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog.
Contact JST for details.

This product displays (LF)(SN) on a label.
  1. The products listed above are supplied on embossed-tape.
  2. Contact JST for the headers with tin-plated pins.
  3. Contact JST for the top entry type headers with suction cap.
  • 1 AWG #28
  • 2 AWG #28
  • 3 Including temperature rise in applying electrical current
  • 4 Reflow treatment