Print Back
  • Radial Lead
  • High capacitance model has been introduced to the product range.
  • Super low ESR, high ripple current capability
  • Halogen Free
Unit of Measure

Specifications

Available

N/A {0}

Manufacturer Stock

N/A {0}

Brands

N/A Nippon Chemi-Con

Manufacturer

N/A United Chemi-Con

Series

N/A NPCAP™-PSG

Temperature Range

N/A -55 to +105 ºC

Working Direct Current (DC) Voltage

N/A 25 V

Capacitance

N/A 220 µF

Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature

N/A 20 %

Maximum Equivalent Series Resistance (ESR) at 100 to 300 Kilohertz (kHz) Frequency, 20 Degree Celsius (ºC) Temperature

N/A 16 mΩ

Rated Ripple Current at 105 Degree Celsius (ºC) Temperature, 100 Kilohertz (kHz) Frequency

N/A 4650 mArms
Leakage Current at 20 Degree Celsius (ºC) Temperature After 2 Minutes1 N/A I=0.2CV or 500 μA, whichever is greater
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)

Maximum Dissipation Factor (Tan δ) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature

N/A 0.12

Maximum Impedance Ratio Low Temperature Characteristics at 100 Kilohertz (kHz) Frequency

N/A Z(-25 ºC)/Z(+20 ºC) ≤1.15
Z(-55 ºC)/Z(+20 ºC) ≤1.25

Endurance at 105 Degree Celsius (ºC) Temperature

N/A 15000 to 20000 hours

Industry Standards

N/A Restriction of Hazardous Substances (RoHS) Compliant

Dimensions

Diameter (D)

N/A 8 mm

Maximum Diameter (D)

N/A 8.5 mm

Dimension L

N/A 11.5 mm

Maximum Dimension L

N/A 13 mm

Diameter (d)

N/A 0.6 mm

Dimension F

N/A 3.5 mm

Rated Ripple Current Multipliers

Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency

N/A 0.10

Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency

N/A 0.35

Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency

N/A 0.60

Rated Ripple Current Multipliers at 50 Kilohertz (kHz) Frequency

N/A 0.80

Rated Ripple Current Multipliers at 100 to 500 Kilohertz (kHz) Frequency

N/A 1

Endurance

Endurance

N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after the rated voltage is applied for 20,000 hours (20 to 35V : 15,000 hours) at 105 ºC.

Appearance: No significant damage
Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ 150% of the initial specified value
ESR: ≤ 150% of the initial specified value
Leakage current: ≤ The initial specified value

Bias Humidity Test

Bias Humidity Test

N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjecting them to DC voltage at 60 ºC, 90 to 95% RH for 1,000 hours.

Appearance: No significant damage
Capacitance change: ≤ ±20% of the initial
D.F. (tan δ): ≤ The initial specified value
ESR: ≤ 150% of the initial specified value
Leakage current: ≤ The initial specified value

Surge Voltage Test

Direct Current Surge Voltage (SVDC)

N/A 29 V

Surge Voltage Test

N/A The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 ºC for 30 seconds through a protective resistor (R=1 kΩ) and discharge for 5 minutes 30 seconds.

Appearance: No significant damage
Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ The initial specified value
ESR: ≤ 150% of the initial specified value
Leakage current: ≤ The initial specified value

Note

Note

N/A Product specifications are subject to change without notice. Request our product specifications before purchase and/or use. Please use our products based on the information product specifications.
  • 1 If any doubt arises, measure the leakage current after the following voltage treatment.
    Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105 ºC.