Print Back
  • Low impedance
  • Solvent resistant type
  • Vibration resistant structure
  • AEC-Q200 compliant
Unit of Measure

Specifications

Available

N/A {0}

Manufacturer Stock

N/A {0}

Brands

N/A Nippon Chemi-Con

Manufacturer

N/A United Chemi-Con

Series

N/A Alchip™-MZA

Working Direct Current (DC) Voltage

N/A 50 V

Capacitance

N/A 100 µF

Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature

N/A 20 %

Maximum Impedance at 100 Kilohertz (kHz) Frequency and 20 Degree Celsius (ºC) Temperature

N/A 0.34 Ω

Rated Ripple Current at 105 Degree Celsius (ºC) Temperature, 100 Kilohertz (kHz) Frequency

N/A 350 mArms

Temperature Range

N/A -55 to +105 ºC

Leakage Current at 20 Degree Celsius (ºC) Temperature After 2 Minutes

N/A I=0.01CV or 3 µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)

Maximum Dissipation Factor (Tan δ) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature

N/A 0.10

Maximum Impedance Ratio Low Temperature Characteristics at 120 Hertz (Hz) Frequency

N/A Z(-25 ºC)/Z(+20 ºC) = 2 Z(-40 ºC)/Z(+20 ºC) = 3 Z(-55 ºC)/Z(+20 ºC) = 3

Mounting Style

N/A Surface Mount

Industry Standards

N/A Restriction of Hazardous Substances (RoHS) 2 Compliant

Dimensions

Dimension D

N/A 8 mm

Dimension L

N/A 10 mm

Dimension L Tolerance (±)

N/A 0.5 mm

Dimension A

N/A 8.3 mm

Dimension B

N/A 8.3 mm

Dimension C

N/A 9 mm

Dimension W

N/A 0.7 to 1.1 mm

Dimension P

N/A 3.1 mm

Rated Ripple Current Multipliers

Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency

N/A 0.40

Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency

N/A 0.75

Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency

N/A 0.90

Rated Ripple Current Multipliers at 100 Kilohertz (kHz) Frequency

N/A 1

Note for Rated Ripple Current Multipliers

N/A The deterioration of aluminum electrolytic capacitors accelerates their life due to the internal heating produced by ripple current.

Endurance

Endurance

N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after the rated voltage is applied for the specified time at 105 ºC.

Time: 2,000 hours
Capacitance change: ≤ ±30% of the initial value
D.F. (tan δ): ≤ 200% of the initial value
Leakage current: ≤ The initial specified value

Note

Note

N/A Product specifications are subject to change without notice. Request our product specifications before purchase and/or use. Please use our products based on the information contained product specifications.