Print Back
  • Super low ESR/impedance capacitors due to very low resistivity electrolyte
  • The KZG series capacitors are designed for computer motherboards
  • Non solvent resistant type
Unit of Measure

Specifications

Available

N/A {0}

Manufacturer Stock

N/A {0}

Brands

N/A Nippon Chemi-Con

Manufacturer

N/A United Chemi-Con

Series

N/A KZG

Temperature Range

N/A -40 to +105 ºC

Working Direct Current (DC) Voltage

N/A 6.3 V
Maximum Dissipation Factor (Tan δ) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature1 N/A 0.22 %

Capacitance

N/A 1800 µF

Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature

N/A 20 %

Leakage Current at 20 Degree Celsius (ºC) Temperature After 2 Minutes

N/A I=0.01CV or 3 µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)

Maximum Impedance Ratio Low Temperature Characteristics at 120 Hertz (Hz) Frequency

N/A Z (-25 ºC) / Z (+20 ºC) = 2
Z (-40 ºC) / Z (+20 ºC) = 3

Maximum Impedance at 100 Kilohertz (kHz) Frequency and 20 Degree Celsius (ºC) Temperature

N/A 0.021 Ω

Rated Ripple Current at 105 Degree Celsius (ºC) Temperature, 100 Kilohertz (kHz) Frequency

N/A 1870 mArms

Industry Standards

N/A Restriction of Hazardous Substances (RoHS) Compliant

Dimensions

Diameter (D)

N/A 8 mm

Maximum Diameter (D)

N/A 8.5 mm

Dimension L

N/A 20 mm

Maximum Dimension L

N/A 21.5 mm

Diameter (d)

N/A 0.6 mm

Dimension F

N/A 3.5 mm

Rated Ripple Current Multipliers

Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency

N/A 0.60

Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency

N/A 0.87

Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency

N/A 0.95

Rated Ripple Current Multipliers at 100 Kilohertz (kHz) Frequency

N/A 1

Note for Rated Ripple Current Multipliers

N/A The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 ºC rise.

Endurance

Endurance

N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjected to DC voltage with the rated ripple current for 2000 hours at 105 ºC.

Capacitance change: ≤ ±25% of the initial value
D.F. (tan δ): ≤ 200% of the initial specified value
Leakage current: ≤ The initial specified value

Shelf Life

Shelf Life

N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after exposing them for 1000 hours at 105 ºC without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.

Capacitance change: ≤ ±25% of the initial value
D.F. (tan δ): ≤ 200% of the initial specified value
Leakage current: ≤ The initial specified value

Note

Note

N/A Product specifications are subject to change without notice. Request our product specifications before purchase and/or use. Please use our products based on the information contained product specifications.
  • 1 When nominal capacitance exceeds 1,000 µF, add 0.02 to the above value for each 1,000 µF increase.