Print Back
  • Low impedance, high ripple and long life from KYA series
  • Newly innovative electrolyte is employed to minimize impedance
  • Non solvent resistant type
Unit of Measure

Specifications

Available

N/A {0}

Manufacturer Stock

N/A {0}

Brands

N/A Nippon Chemi-Con

Manufacturer

N/A United Chemi-Con

Series

N/A KYB

Working Direct Current (DC) Voltage

N/A 100 V

Capacitance

N/A 100 µF

Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature

N/A 20 %

Maximum Impedance at 100 Kilohertz (kHz) Frequency and 20 Degree Celsius (ºC) Temperature

N/A 0.075 Ω

Maximum Impedance at 100 Kilohertz (kHz) Frequency and -10 Degree Celsius (ºC) Temperature

N/A 0.30 Ω

Rated Ripple Current at 105 Degree Celsius (ºC) Temperature, 100 Kilohertz (kHz) Frequency

N/A 1040 mArms

Temperature Range

N/A -40 to +105 ºC

Leakage Current at 20 Degree Celsius (ºC) Temperature After 2 Minutes

N/A I=0.01CV or 3 µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)

Maximum Dissipation Factor (Tan δ) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature

N/A 0.08

Maximum Impedance Ratio Low Temperature Characteristics at 120 Hertz (Hz) Frequency

N/A Z(-25 ºC)/Z(+20 ºC) = 2
Z(-40 ºC)/Z(+20 ºC) = 3
Endurance at 105 Degree Celsius (ºC) Temperature1 N/A 4000 to 10000 hours

Industry Standards

N/A Restriction of Hazardous Substances (RoHS) 2 Compliant

Dimensions

Diameter (D)

N/A 10 mm

Maximum Diameter (D)

N/A 10.5 mm

Dimension L

N/A 20 mm

Maximum Dimension L

N/A 21.5 mm

Diameter (d)

N/A 0.6 mm

Dimension F

N/A 5 mm

Rated Ripple Current Multipliers

Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency

N/A 0.40

Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency

N/A 0.75

Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency

N/A 0.90

Rated Ripple Current Multipliers at 100 Kilohertz (kHz) Frequency

N/A 1

Note for Rated Ripple Current Multipliers

N/A The deterioration of aluminum electrolytic capacitors accelerates their life due to the internal heating produced by ripple current.

Endurance

Endurance

N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105 ºC.

Time: 8,000 hours
Capacitance change: ≤ ±25% of the initial value
D.F. (tan δ): ≤ 200% of the initial specified value
Leakage current: ≤ The initial specified value

Shelf Life

Shelf Life

N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after exposing them for 500 hours at 105 ºC without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.

Capacitance change: ≤ ±25% of the initial value
D.F. (tan δ): ≤ 200% of the initial specified value
Leakage current: ≤ The initial specified value

Note

Note

N/A Product specifications are subject to change without notice. Request our product specifications before purchase and/or use. Please use our products based on the information contained in product specifications.
  • 1 With ripple current