Print Back
  • Downsized and Longer life from current KXG series
  • For electronic ballast circuits and other long life applications
  • Non solvent resistant type
  • AEC-Q200 compliant
Unit of Measure

Specifications

Available

N/A {0}

Manufacturer Stock

N/A {0}

Brands

N/A Nippon Chemi-Con

Manufacturer

N/A United Chemi-Con

Series

N/A KXJ

Working Direct Current (DC) Voltage

N/A 160 V

Capacitance

N/A 470 µF

Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature

N/A 20 %

Dissipation Factor (Tan δ)

N/A 0.20

Rated Ripple Current at 105 Degree Celsius (ºC) Temperature, 120 Hertz (Hz) Frequency

N/A 1660 mArms

Temperature Range

N/A -40 to +105 ºC

Leakage Current at 20 Degree Celsius (ºC) Temperature After 1 Minute

N/A I=0.04CV+100
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)

Leakage Current at 20 Degree Celsius (ºC) Temperature After 5 Minutes

N/A I=0.02CV+25
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)

Maximum Impedance Ratio Low Temperature Characteristics at 120 Hertz (Hz) Frequency

N/A Z(-25 ºC)/Z(+20 ºC) = 3
Z(-40 ºC)/Z(+20 ºC) = 6

Industry Standards

N/A Restriction of Hazardous Substances (RoHS) 2 Compliant

Dimensions

Diameter (D)

N/A 18 mm

Maximum Diameter (D)

N/A 18.5 mm

Dimension L

N/A 31.5 mm

Maximum Dimension L

N/A 33 mm

Diameter (d)

N/A 0.8 mm

Dimension F

N/A 7.5 mm

Rated Ripple Current Multipliers

Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency

N/A 1

Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency

N/A 1.67

Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency

N/A 2.05

Rated Ripple Current Multipliers at 100 Kilohertz (kHz) Frequency

N/A 2.25

Note for Rated Ripple Current Multipliers

N/A The deterioration of aluminum electrolytic capacitors accelerates their life due to the internal heating produced by ripple current.

Endurance

Endurance

N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified time at 105 ºC.

Time: 12,000 hours
Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ 200% of the initial value
Leakage current: ≤ The initial specified value

Shelf Life

Shelf Life

N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after exposing them for 1,000 hours at 105 ºC without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.

Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ 200% of the initial value
Leakage current: ≤ 500% of the initial value

Note

Note

N/A Product specifications are subject to change without notice. Request our product specifications before purchase and/or use. Please use our products based on the information contained in product specifications.